BMW also recommends an oil change interval of 15,000 miles. The brands that BMW uses are the Mobil Full Synthetic 5W-30 High Mileage, Mobil 1 SAE 0W-40, Valvoline SynPower SAE 5W-30 or Castrol Syntec European Formula SAE 0W-30.
Does BMW need special oil?
With motor oil being the most important fluid next to gasoline in your BMW vehicle, it’s important that you don’t scrimp on the quality or type of motor oil you put in your BMW. That’s why BMW recommends the exclusive use of synthetic motor oils inside all BMW engines.
What engine oil does a BMW?
BMW Longlife-12 FE approved oils. Mobil 1™ ESP LV 0W-30 is a fully synthetic low ash oil that has been approved by BMW Longlife-12 FE oils for use in petrol and diesel engines in Europe.
Can I use any 5W-30 oil in my BMW?
Oil for BMW’s must have an API rating of SM or higher; your recommended SAE grade* will vary based on climate. A few of the recommended oils for your 2007 BMW include Mobil 1 SAE 0W-40 and Valvoline SynPower SAE 5W-30. If you live in a cold weather climate, the use of the 0W-40 is best.
What brand of oil does BMW recommend? – Related Questions
Which oil is better 0w30 or 5w-30?
0W30 is the ideal oil for your automobile during the winter, especially if you live in a state or country with a very cold temperature. 5W30 is ideal for a wide range of temperatures. Therefore, it can be used in hot and cold climates.
Is 0w30 Good for BMW?
BMW now recommends 0W30 for all models that called for a LL-01 5W30.
Can I use 5w30 instead of 0w30 BMW?
0w30, 5w30, 0w40, and 5w40 are perfectly okay. 0w30 and 5w30 are the exact same viscosity at operating temperature. 0W30 would cover a wider range than 5W30.
Why did BMW switch to 0w30?
Gareth, our BMW Catalog Manager, explains the switch from 5w-30 (LL-01) to 0w-30 (LL-01FE) oil. The new 0w-30 “FE” product should better protect your engine on cold starts and offer increased fuel economy.
Is 5W-30 for BMW?
Daytona 5W-30 Fully Synthetic Engine Oil is a low SAPS oil manufactured for the latest generation of BMW, Mercedes-Benz, Vauxhall & Chevrolet vehicles, giving maximum performance and protection from cold start to continuous high speeds.
What is 0w30 oil used for?
Switching to a Mobil™ 0W-30 advanced full synthetic formulation motor oil can help to increase engine efficiency and improve fuel economy versus higher viscosity oils. 0W-30 is widely suggested by American, European and Asian automakers as a viscosity alternate to higher viscosity oils for driving in frigid weather.
What car takes 0w30?
0W-30 oil is highly recommended for high-performance, heavy-duty diesel engines, passenger cars, and light trucks. Diesel engines are prone to engine deposits and buildups, and 0W-30 oil provides excellent engine protection against these problems.
What is the difference between 0w30 and 5W 40?
Since both 0W-40 and 5W-30 are winter-grade oils, they’ll work effectively in cold temp regions. 0W-40 oil flow can normally go down to -40℃, whereas 5W-30 oil flow can go down to -35℃. When it gets hot, 0W-40 oil shows better performance than 5W-30, with the ability to perform well up to +40℃.
Can I use 0w30 instead of 0w20?
Essentially 0w-30 does not protect your engine nearly as well as 0w-20 but is ideal for more extreme temperatures (temperatures of over 400°F). According to stikkitnow: While the 0w30 motor oil promises to protect your engine from tear, the 0w20 motor oil does this in a more outstanding and dramatic way.
Is it OK to put 5W30 in a 0w20 engine?
Yes, It’s OK to mix 5w30 with 0w20, but It’s better to use 5w30 synthetic oil rather than regular oil. Because The 0w20 are either fully synthetic or part synthetic motor oil, it’ll affect your car warranty if you have.
Is 0w20 good for hot weather?
0w20 is a fast flowing oil used in modern multi valve engines it will flow quickly through the engine when it is cold. If it is recommended by the manufacturer it should not be a problem in hot weather.
Should I use 0W-20 or 5W-20?
So if you’re going to be driving a lot in below-freezing temperature climates and rarely drive in warmer temperature climates, 0W-20 oil grade would be ideal for you. On the other hand, 5W-20 has a higher viscosity and performs slightly better in seasonal climates.
Does 0W20 damage engine?
Answer: Yes, 0W-20 is unquestionably safe for your engine. Manufacturers have been specifying 5W-20 and 0W-20 since the early part of the last decade and there is no evidence whatsoever that engine wear rates have increased.
How long does 0W 20 oil last?
How Often Should You Change Synthetic Oil? Standard oil change intervals are typically listed at 5,000 miles or 6 months to ensure peak performance. Toyota models that are required to use 0W-20 synthetic oil extend that interval to 10,000 miles or 12 months.
Why do new cars use 0W20?
Auto manufacturers are looking to make engines smaller and lighter while delivering more power than ever. To protect these smaller powerful engines, thinner oils with better ability to protect and clean engines are needed. This has led to 0W-20 being the fastest growing grade in the motor oil marketplace.
Which oil is better 0W-20 or 5W30?
0w20 engine oil is known as the popular choice of lubricant that delivers the best performance. It flows well even at cold temperatures when compared to the 5W-30 oils, thanks to the ability of the lubricant to maintain the same viscosity or the semi-fluid consistency throughout the internal structure of an engine.