Firestone Destination LE2 is overall, a very good tire for wet and slick areas. Even at high speeds on a wet road, this tire grips the road excellently, so there is no need to worry for cornering or braking. The tread design lessens the risk of hydroplaning as well.
How many miles are Firestone Destination tires good for?
Backed by a 70,000-mile limited warranty*, these all-season tires will keep your adventure going no matter the destination. *Conditions apply.
Are Firestone Destination AT tires snow rated?
For dependable off-road traction and heavy-duty toughness that lasts, look no further than the Destination X/T. This all-terrain light truck and SUV all-weather tire delivers year-round performance and is 3 peak mountain snowflake certified.
How do you read a Firestone tire dot?
The raised numbers of the DOT Code are placed together and often enclosed in a raised oval. The first two numbers are the week the tire was manufactured. In the example below, 35 stands for “week 35.” The second two numbers are the year the tire was manufactured.
Are Firestone Destination tires a good tire? – Related Questions
What do the 3 numbers mean on tire size?
B: TIRE WIDTH The three-digit number following the letter is the tire’s width (from side to side, looking at the tire head on) in millimeters. This may also be referred to as the section width. C: ASPECT RATIO The forward slash separates the tire width number from the two-digit aspect ratio.
Do you line up red or yellow dot on tire?
The yellow dot should be lined up and directly next to the valve stem, which is the wheel’s heaviest point. The red dots identify where the tire is flattest—the lowest point on a tire.
How do you read a DOT tire number?
The first two numbers identify the week and the last two numbers identify the year of manufacture. In the example below (DOT AF WD9E 0517) 05 indicates the tire was manufactured in the 5th week of the year. The 17 number indicates it was manufactured during 2017.
How do you read a DOT label on a tire?
The DOT serial number located on the inside sidewall near the rim. The letters “DOT” are followed by eight to thirteen letters and/or numbers that identify where the tire was manufactured, tire size and the manufacturer’s code, along with the week and year the tire was manufactured.
How do I tell what year my Firestone tire is?
Since 2000, the week and year the tire was produced has been provided by the last four digits of the Tire Identification Number with the 2 digits being used to identify the week immediately preceding the 2 digits used to identify the year.
How do you read a tire marking code?
How To Read A Tire Sidewall
- TIRE SIZE.
- P identifies your tire as a Passenger Tire.
- 225 identifies the tire section width, which is the measurement of the tire from sidewall to sidewall in millimeters.
- 50 is the two-figure aspect ratio.
- R indicates the construction used within the tires casing.
What are the 3 types of tire marks?
There are three major types: tire prints, skid marks, and scuff marks.
What are the 4 numbers on a tire?
Tire’s age and the DOT serial number
The serial number shows the year 2000, followed by the four-digit production date. The first two digits of the production date indicate the week and the last two digits show year when the tire was manufactured. This will tell you the age of the tire.
What do the 4 numbers on a tire mean?
DOT Number or Tire Identification Number
This date code will be the last four digits in the code. The first two digits represent the manufacture week and the second two represent the manufacture year.
Is it OK if all 4 tires aren’t the same?
Is It OK to Mix Tires on Your Vehicle? The short answer is that, in general, manufacturers do not recommend tire mixing at all. For optimal safety and performance, it is recommended that vehicles are fitted with the same tires to every wheel position on your car.
What 4 tires wear the most?
Then, since the front tires can wear out much faster than the rears, you will want to probably want to replace only the fronts, and then move the rear tires to the front. Sadly, you can’t have it both ways, unless your vehicle is one of the “exceptions”, you have to choose either wear (economy), or safety.
Do you need all 4 tires to match?
For optimal safety and performance, Continental recommends fitting the same tires to every wheel position on your car, so drivers should have the same brand, size, tread pattern, load index, and speed rating on the front and rear tires.
Is it OK to buy 2 tires instead of 4?
It’s usually dependent on the vehicle itself and the remaining tread depths on the other tires. It’s always best to replace all 4 tires at the same time. This is because all 4 tires spin independently of one another, and different tread depths and/or styles can cause them to spin at different speeds.
Is it OK to replace only 2 tires?
If two of your tires wear out faster, it may only be necessary to replace those two instead of replacing all four. If you do, it’s important to have the two new tires installed on the back and the partially worn tires moved to the front – even on front-wheel-drive vehicles.