Firestone Destination LE2 is overall, a very good tire for wet and slick areas. Even at high speeds on a wet road, this tire grips the road excellently, so there is no need to worry for cornering or braking. The tread design lessens the risk of hydroplaning as well.
How many ply is Firestone Destination at2?
Internal construction of the Destination A/T2 features a robust, two-ply polyester casing to blend durability and ride quality.
How many miles are Firestone Destination tires good for?
Backed by a 70,000-mile limited warranty*, these all-season tires will keep your adventure going no matter the destination. *Conditions apply.
What does mt2 mean on tires?
Firestone Destination M/T2
Made for off-roading, these tires are complete with mud and stone rejector technology and a 3-ply sidewall construction. The terrain may be tough, but these tires are tougher.
Are Firestone Destination tires a good tire? – Related Questions
Is T or H tire better?
H-Rated Tires: This is a perfect, average tire for most sedans and commuter vehicles. It might not seem to fit in our chart, but the tire speed rating “H” is rated for up to 130 mph. T-Rated Tires: This tire is often recommended for family sedans and vans. It’s rated for up to 118 mph.
How long do Firestone mt2 last?
We haven’t noticed any chips or tears in the lugs, either. In our experience, we’d expect the M/T2s to be good for 40,000-45,000 miles if properly maintained and rotated.
What is the difference between MT1 and MT2?
What is the difference between Morse Taper #1 and Morse Taper #2? An MT1 and MT2 have the same taper per inch, but the length of the Morse Taper is different. The best way to know which taper you need for your lathe is to consult your owner’s manual. Another way is to take the taper out of your lathe and measure it.
Are Firestone MT2 snow rated?
Are Max Traction Tires Good in Snow? Though not designed explicitly for snow, max traction tires such as the Firestone Destination M/T2 can provide solid off-road grip and stopping power when the snow flurries start to fall. It’s all thanks to their aggressive tread.
What does D and E mean in tires?
Load range D and E tires have different weight capacities. For example, a load range D tire can handle 1,220 lbs at 65 PSI, while an E tires carry loads at 80 PSI. If looking at their load durability, load range E tires are better, but that is the only difference between them.
What does D or R mean on tires?
R indicates the construction used within the tires casing. R stands for radial construction. B means belted bias and D stands for diagonal bias construction. 17 The last dimension listed in the size is the diameter of the wheel rim, which is most often measured in inches.
What does the T mean on tires?
A “T” means it’s a temporary spare. Some tires get a “Z” or an “F” attached to the radial indicator, denoting a Z-rated tire (see service description below) or a run-flat tire.
Are D tires better than R?
A radial tire flexes more than a bias tire, giving it better ground contact, traction, stability, and tread wear. A radial tire will normally run cooler than a bias ply tire, especially when the tire is under a load. A tire that runs cooler will last longer. For those reasons I would recommend an R tire over a D tire.
Does the R matter in tire size?
The speed rating is the letter that follows the load rating, but you may also see it following the “R” on some tires. This indicates the maximum speed the manufacturer designed the tire to handle.
How fast can you go with R rated tires?
TIRE SPEED RATINGS SAFETY
| Speed Rating |
Maximum Speed |
| N |
Up to 87 mph |
| P |
Up to 93 mph |
| Q |
Up to 100 mph |
| R |
Up to 106 mph |
How fast can you go on R tires?
Speed rating R allows for speeds up to 106 mph (170 km/h) under optimal conditions. Like Q speed rated tires, R rated tires generally prioritize a particular function or unique performance over maximum speed capability.
Can you mix D and R tires?
Expert Reply: It’s fine to use a radial-type tire as a spare (a tire with “r” in its size code) with a trailer that has Bias ply “d” tires but for a short distance in the event of a flat tire. But mixing tires is not recommended for everyday use because their internal construction is different.
Why are radial tires better?
“Radials offer lower fuel consumption, better traction and flotation and improved cut resistance in the tread area, and run much cooler than bias.” “Radial advantages are pretty much across the board,” agrees Wright. Typically they offer longer tread wear and a smoother ride.
Can I use 2 winter and 2 all season tires?
Additionally, drivers should never mix winter tires with all-season/summer tires, or mix run-flat tires with non-run-flat tires. In an ideal situation, all a vehicle’s tires wear out at the same time.