Summary: Toyota is recalling certain model year 2012-2013 Avalon, Avalon HV, Venza, Camry, and Camry HV vehicles. In the affected vehicles, the drain hose for the air conditioning condenser may become clogged causing water to accumulate at the bottom of the air conditioning condenser unit housing.
The 2007 model is on the top of the list for Toyota Camry years to avoid, simply because it has the most problems. One of the most significant complaints, according to RepairPal, is issues with the automatic transmission.
How much does it cost to replace a transmission in a 2013 Toyota Camry?
The cost of a new 2013 Toyota Camry transmission could be over $3,500 depending on the vehicle, however, transmission services such as fluid changes and a transmission fluid flush are considerably fewer expensive, in some cases costing fewer than $150.
Torque Converter Shudder occurs when the clutch inside the converter on an automatic transmission is being applied and the transition from slipping to locked up does not occur smoothly.
Are there any recalls on 2013 Toyota Camry? – Related Questions
How do I stop my transmission from shuddering?
How do I fix my shuttering transmission?
Fortunately, fixing a shuddering transmission is often as simple as getting a transmission flush to replace the contaminated transmission fluid with clean, fresh fluid.
What does torque converter shudder feel like?
Initially, you may notice a whine, or a light rattle while idle. If you feel a tremble when driving around 30 to 45 miles an hour this could be an indication that your torque converter is going bad. A torque shudder, especially on smooth surfaces can be another symptom.
How much does it cost to fix a torque converter shudder?
If you plan on fixing it yourself, then you’ll spend around $150 to $500. On the contrary, taking the vehicle to the transmission shop may require $600 to $1000 to cover the repair costs. It’ll also take about 5 to 10 hours to get the job done.
What are the signs of a faulty torque converter?
6 Signs of a Failing Torque Converter
Loss of Acceleration.
Slipping Between Gears.
Vehicle Won’t Shift at All.
Transmission is Overheating.
Transmission Fluid Leak.
Bad Transmission Fluid.
Does torque converter shudder damage transmission?
If there is excessive debris is still found within the transmission pan or the shudder keeps happening after servicing, then you may need to replace the torque converter. In some cases, you may need to have your transmission rebuilt. Continuing to drive with the shudder could cause your transmission to fail.
To put it briefly, no you should never drive your vehicle if you believe there to be an issue with your transmission in any case. Once a transmission starts slipping it needs to immediately be repaired. Every time you drive it after you feel your transmission slip, it is a risk.
Is shudder fix Good for transmission?
Instant Shudder Fixx is compatible with all conventional or synthetic automatic transmission fluids.
Does Lucas transmission Fix shudder?
Our product also has been prove to be effective in reducing shudder in automotive transmissions including Hondas.
How much shudder fix should I use?
system Do not exceed two 2oz.
Does transmission additive really work?
In most cases, unfortunately, the answer is no. In general, the additives that you’ll find on the shelves of a consumer-oriented parts store won’t really deliver on their extravagant promises. So what do these additives do? In general, they soften and swell the seals in your transmission.
Can I add Lucas to a full transmission?
bottle of Lucas Transmission Fix can be added to existing fluid without draining. A second bottle may be necessary in large or badly worn transmissions.
What is the best additive for automatic transmission?
Our pick for the best transmission additive is the Prolong Super Lubricants PSL15000. It is one of the best transmission additives on the market. It reduces leaks, shudders, slippage, and sludge buildup. For a less pricey option, consider the Lucas LUC10009.
What happens if you put too much ATF in your transmission?
Transmission fluid will become foamy if there is too much fluid. Excessive fluid prohibits proper lubrication and cooling and slows the rotating crankshaft, similar to the effect of running through water.
How long does it take Lucas transmission Stabilizer to work?
After adding it to your transmission, you should drive around for 15 – 20 minutes in order for it to fully blend with the existing fluid. You should notice the effects almost immediately.