Can I use 215 60R16 instead 205 65R16?

Generally yes you can but as the tyre is marginally taller it would likely mean your speedo would be reading slightly under your actual road speed if on the driven wheels and it is possible that you may have wheel arch clearance issues though a little unlikely if fitted to the front wheels.

What is the difference between 205 55R16 and 215 60R16?

The first number is how wide the tread is in millimeters, the second number is what percentage of that, the sidewall is tall. So if you do the math, 60% of 215 is 129. 55% of 205 is 112.75. So that means with the bigger size tire, your speedometer will be off by about 13 percent.

RELATED READING  Are Cooper Tires considered a good tire?

Can I use 215 65R16 instead of 215 60R16?

You could, but it is not recommended.

Can I use 215 60R16 instead 205 65R16? – Related Questions

Can I install 215 tires instead of 205?

Physically they should fit on the rim and tire without issue. The difference is going to be the rolling distance is a bit shorter for the new (to you) tires. 215 to 205 is 1cm difference in width.

Are 215 tyres wider than 205?

A 205 and a 215 tire differ 0.4 inches when it comes to tire diameter which means that 215 tires are also 0.2 inches taller in comparison. This is not enough to make a massive difference, but it is still worth mentioning.

Is it OK to use tires with a different aspect ratio?

It is not OK. You should have the same size tires between right and left. Not doing so can cause problems with acceleration, handling, and braking.

Can you substitute tire sizes?

Once you choose a tire size for your vehicle, you’ll want to stick with that size when you buy replacements. The reason for this is that a differently sized tire can confuse your speedometer and even cause damage to your vehicle’s anti-lock braking systems and stability system calibrations.

What happens if you use the wrong tire size?

Reduced Performance Quality

Firstly, driving on tires that don’t fit properly can severely hinder your car’s performance capabilities. They do this by preventing the treads from coming into full contact with the pavement and lessening traction as a result.

Can wrong size tires damage transmission?

Increasing Tire Size Can Wear Out Your Drivetrain & Transmission.

Is it safe to replace just one tire?

If your tires’ tread depth will be within 4/32” of each other, you can get away with replacing just one or two tires. If you drive an AWD vehicle, the tires must be within 2/32” of each other. But you should always check the vehicle owner’s manual to see what the manufacturer recommends.

Is it okay to change only one tire?

Keep in mind, you can replace just one tire if your other tires have most of their tread, but you must make sure you buy the same Tire Brand/Make/Model of your other tires for optimal performance.

What is the rule of thumb for replacing tires?

The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth. The idea of the penny test is to check whether you’ve hit the 2/32” threshold.

Should new tires go on front or back?

According to Tire Review, new tires should always go in the back. Rear tires provide the vehicle stability, and if they have little tread, then stability is lost.

When should you not plug a tire?

Puncture repairs are limited to the center of the tread area. If there are punctures or damage in the shoulder or sidewall of the tire, it is not repairable.

Why can’t you patch a hole in the side of tires?

Unfortunately, sidewall punctures on passenger or light truck tires can’t be repaired. That’s because: The patch won’t hold – Tires have cords that run all around the tread of the tire, the part the makes contact with the road. But on the sidewall, those cords aren’t there.

Leave a Comment