Best Answer. Those tires will fit. The diameter difference is very small. All you have to do is roll one over to your car and compare!
Can I replace my tires with a different size?
Once you choose a tire size for your vehicle, you’ll want to stick with that size when you buy replacements. The reason for this is that a differently sized tire can confuse your speedometer and even cause damage to your vehicle’s anti-lock braking systems and stability system calibrations.
Can I use 225 60R17 instead of 225 55r17?
To answer your question, yes, you can because your rim size and tire width will remain the same.
What size is a 225 60 17?
225/60R17 tire has an overall diameter of 27.6 inches or 702 mm that represents the outer diameter of the tire or tire height.
Can I use 215 60R17 instead of 225 60R17? – Related Questions
What is the difference between 225 55 r17 and 225 65 r17?
The difference in the dimension of the two tyres is purely in the aspect ratio of the sidewall so the /65 tyres will have a bigger sidewall (note that the number is 65% of the width, not 65 somethings – i.e. 165.75mm vs 140.25mm and that’s effectively doubled because you’re taking radius, not diameter) and therefore
What is the most common 17 inch tire size?
The most popular 17″ tires
- 215/55R17.
- 225/45R17.
- 225/65R17.
- 265/70R17.
What does 225 60 mean on a tire?
225 identifies the tire section width, which is the measurement of the tire from sidewall to sidewall in millimeters. This measurement varies depending on the rim to which it is fitted. (There are 25.4 millimeters per 1 inch.) 60 is the two-figure aspect ratio.
What size is a 225 tire in inches?
The section width can be converted to inches by dividing the width in millimeters by 25.4 like so: (225 millimeters) / (25.4 mm/in) = 8.86 inches.
What does P225 45R17 mean?
Aspect ratio
So if the tire markings indicate P225/45R17 91V, it means that the height of the sidewall is 225 multiplied by 0.55 or 101.25 millimeters. The number 45 means that the height is equal to 45 percent of the width. Bigger tire ratio indicates bigger and taller tire sidewall.
What is a 225 tire size?
The number “225” stands for the width of the tire in millimeters – so in this case the tire is 22.5 cm wide. The “45” that follows is the aspect ratio – the height of the tire sidewall as a percentage of its width. In our case that means 10.1 cm.
Can I use 215 60R16 instead of 225 60R16?
“Can I replace 225/60R16 tires with 215/60R16?” Yes, but you shouldn’t replace just a single tire with a different size.
Can I use 205 instead of 225 tires?
Will a 205/55 R16 replace a 225/45 R17 tire? Absolutely not . The tires fit two different size wheels.
Are 225 and 215 tires interchangeable?
Can 215 tires replace 225? Yes, you can. But only if the rims on your car can accommodate tires that are 10-20 millimeters wider. Bear in mind that wider wheels require more fuel due to their increased rolling resistance.
Can I use 215 65R17 instead of 225 65R17?
Yes you can. The tire is only 10mm thinner and 6.5mm shorter. You will notice no difference in drivability.
Can you replace 225 65R17 with 235 65R17?
Yes you could but it would reduce the overall diameter of the wheel and tyre, so the height would be slightly less, as would the tread width.
Can I mismatch tire sizes?
Primarily, you should avoid mixing different tire brands and different tread patterns. There are rare exceptions for approved mixed-tire fittings, but in general, manufacturers do not recommend tire mixing at all.
Is it OK to replace just one tire?
Reasons to Avoid Replacing Only One Tire
To achieve optimum vehicle handling, ride comfort, and road traction, it’s generally recommended that you have all four tires replaced at the same time.
Can different size tires mess up your alignment?
Tire size affects a car’s alignment. When the tire size is different from the factory, a car’s alignment will need to be adjusted after a tire change.