Can I use 225 60r16 instead of 225 65r16?

Can I put 225/60/R16 tires on my town and country van instead of 225/65/R16. As long as you replace all 4 that should be fine. The ride will suffer slightly as you will lose some sidewall.

Can I use 225 60R17 instead of 235 65R17?

Not safely, no. If you go to a narrower tread width tire you will want to increase the sidewall height aspect ratio exponentially. The shorter sidewall 225/60R17 tire will not provide the needed load carrying capability needed for your vehicle.

Can I use 225 60r16 instead of 225 65r16? – Related Questions

What does 225 60 mean on a tire?

225 identifies the tire section width, which is the measurement of the tire from sidewall to sidewall in millimeters. This measurement varies depending on the rim to which it is fitted. (There are 25.4 millimeters per 1 inch.) 60 is the two-figure aspect ratio.

What does 65 mean on a tire?

The aspect ratio is indicated on the tire sidewall as a percentage. It’s the height of the sidewall measured from wheel rim to top of the tread, expressed as a percentage of tire width. In this example, the aspect ratio is 65, meaning the sidewall is 65 percent as high as the tire is wide.

What is the difference between 60 and 65 Tyres?

A 60 series has a sidewall height of 60 percent of the width of the tire and a 65 has a sidewall height of 65 percent.

Is 65 a low profile tire?

RAY: No, a tire’s profile refers to the height of the sidewall. On a tire with an aspect ratio (profile) of 65, the sidewall’s height is 65 percent of the tire’s width. 60 or 65 is a normal tire. Fifty and 45 would be considered low-profile, and would have a shorter sidewall.

Is 60 percent tire tread good?

Used tires tread can be up to 90%, but the average is 6-8/32”. Tires in good condition should have a minimum of 6/32” to be useful, or 4/32” if the tire is 13-14”. The average legal minimum tread depth is 2/32”, but driving becomes unsafe with such a tread.

RELATED READING  Who makes Rubitrek tires?

What does 225 mean on a tire?

The number “225” stands for the width of the tire in millimeters – so in this case the tire is 22.5 cm wide. The “45” that follows is the aspect ratio – the height of the tire sidewall as a percentage of its width.

What does 65R17 mean?

Tire sizes are expressed with three numbers. For example, on a P215/65R17 tire, 215 is the width of the tire in millimeters; 65 is the aspect ratio or profile, meaning that the height of the sidewall is 65% of the width of the tread; and 17 is the diameter of the wheel on which it is mounted.

What is the difference between 225 65 R17 and 225 55 R17?

The difference in the dimension of the two tyres is purely in the aspect ratio of the sidewall so the /65 tyres will have a bigger sidewall (note that the number is 65% of the width, not 65 somethings – i.e. 165.75mm vs 140.25mm and that’s effectively doubled because you’re taking radius, not diameter) and therefore

What does 235 65R17 mean?

The number 235 is the cross-section width in millimeters, and 65 is the ratio of sidewall height to cross-section width (65 percent). R means radial-ply construction, and 17 is the wheel diameter, in inches.

Can I replace 235 65R17 with 225 65R17?

Yes you could but it would reduce the overall diameter of the wheel and tyre, so the height would be slightly less, as would the tread width.

How do I choose the best tire size?

Do bigger tires mean smoother ride?

As a general rule, bigger wheels result in a rougher ride. Switching to a smaller wheel and a thicker tire can give you a smoother ride without any major modifications to your car. However, if you go too crazy and change your wheel size too much, it can cause some problems.

Do bigger tires wear out faster?

Fast-Wearing Tires

This forces tires to scrape against the surface which wears them out faster. Rotating them more often will help delay the wear and tear. However, keep in mind that big tires generally have shorter life spans than smaller tires.

Leave a Comment