Can I use 5w30 instead of 10W30 in my Honda lawn mower?
by
Running Cold
If your mower manual calls for a 5W-30 engine oil, using a 10W-30 oil is also acceptable. The only difference between the two oils is the low temperature point, with the 5W-30 functioning slightly better than the 10W-30.
A: Vikranth – Yes we recommend using Honda 10w-30 motor oil in all Honda power equipment.
Can you use synthetic oil in a Honda lawn mower?
Can I use synthetic oil in my Honda engine? Honda engines are developed, tested and certified with petroleum based motor oils as a lubricant. Synthetic oils may be used; however, any motor oil used in our engines must meet all oil requirements as stated in the owner’s manual.
The Honda mower capacity for oil across all the most recent models in the HRX, HRN, HRR, and HRS series is 13.5 ounces. The HRC commercial series has an engine oil capacity of 21 ounces.
Can I use 5w30 instead of 10W30 in my Honda lawn mower? – Related Questions
How often should you change the oil in a Honda lawn mower?
Honda recommends an oil change after every 50 hours of use unless the mower is brand new, in which case its oil will need to be changed after just 5 hours of initial use. When changing the mower’s oil, remember always to use a high-detergent oil made for 4-stroke engines.
Is SAE 30 same as 10W30?
10w30 is thinner than SAE 30. The “30” means that it has the same viscosity as the other when the engine is hot. However, since it is thinner, it will never become as thick as SAE 30 when it gets cold. 10w30 has a viscosity of 10w which means it will start moving and protecting engine parts at a colder temperature.
How much oil do I put in my lawn mower?
Walk-behind mowers:
Oil capacity is typically 15oz or 18oz*. Change engine oil every 50 hours or annually, which ever comes first.
How much oil does a Honda GCV160 take?
. 58 quarts of 10W-30 oil.
How much oil does a Honda hrx217 lawn mower take?
If you don’t use the supplied oil, add enough SAE 10W-30 API service category SJ or later oil to bring the oil level between the upper and lower limit marks on the dipstick—without screwing the dipstick in (approximately 12 to 13.5 ounces is required). See page 12. Do not overfill the engine with oil.
What kind of oil does a Honda GCV160 lawn mower take?
Oil. Honda recommends 10W30, but 5W30 can also be used, or SAE 30 so long as temperatures are above 50 degrees F (10 degrees C.) This oil should meet API standard SJ or later. To check the oil, remove the dipstick from the filler neck, wipe off any oil, and reinsert it without screwing it back into the neck.
What does GCV stand for Honda?
Power Products. Honda Motor Co., Ltd. today announced that its GCV Series*1 of general purpose engines is undergoing a full model change and the all-new GCV Series engines will go on sale in September 2018 for manufacturers (OEMs) of various power products in Europe.
How much oil does a Honda GC160 take?
Features
GC160
GC190
Fuel Tank Capacity
1.9 U.S. qts (1.8 liters)
1.9 U.S. qts (1.8 liters)
Fuel
Unleaded 86 octane or higher
Unleaded 86 octane or higher
Oil Capacity
0.61 US qt (0.58l)
0.61 US qt (0.58l)
Lubrication System
Splash
Splash
Is the Honda GCV160 a good engine?
Quiet, Lightweight Reliable Power
Honda GCV engines offer a quiet, yet powerful and lightweight combination for a variety of demanding applications. Ideal for residential mowers and pressure washers, these engines pack a punch.
Does Honda GCV160 have oil filter?
Why are Honda small engines so good?
Since the cylinder and head are cast as a single unit, there’s no head gasket or bolts to fail, and there’s better heat transfer between these two sections of the engine, increasing reliability, particularly in harsh environments.
Honda Power Equipment HRR216VYA GCV160 Self Propelled • $579
Great features and great performance meet great value.
What year did the Honda GCV160 come out?
Tokyo, April 15, 1997 – Honda Motor Co., Ltd. introduced today its GC160/135 and GCV160/135 families of compact, multi-purpose 4 stroke OHC engines.
How much horsepower does a Honda 160cc lawn mower have?
Power and Torque
The Honda 160cc lawnmower engine has a maximum speed of 3,300 rpm and can output 7.1 to 8.4 foot pounds of torque, depending on the exact configuration. Most 160cc Honda mower engines output around 5.5 horsepower.
Why does my Honda GCV160 won’t start?
If it still won’t start, make sure the spark plug is clean and in good working order and there is fresh fuel in the fuel tank. If that doesn’t fix it, have the engine looked at by an authorized dealer. If the engine is low on power, check the air filter for dirt and damage, and make sure the fuel is fresh.
Why is my Honda mower hard starting?
Common solutions for: Honda Lawn mower is hard to start. The carburetor might be clogged. A clogged carburetor is most commonly caused by leaving fuel in the hedge trimmer for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance.