The P0010 code is considered moderately severe and even though it’s recommended to fix it as soon as possible, you can still drive your car despite the check engine light being illuminated and the P0010 code being stored in the ECU.
Code P0010 is triggered when the ECM attempts to adjust the Bank 1 intake camshaft timing by utilizing one of these valves, and it detects an electrical issue in either the circuit going to the valve or the windings of the solenoid in the valve itself.
Here are some of the possible repairs and their approximate cost: Variable Valve Timing control solenoid: $500 – $600. Camshaft position sensor: $120 – $300. Wiring repair or replacement: $100 – $1000.
What does trouble code P0010 mean?
The engine code P0010 indicates a problem with the car’s variable valve timing, probably caused either by engine oil sludge or by a failure of the engine control module. Engine codes can give you direct insight into your engine’s health — but sometimes those codes take some work to translate. Car insurance.
Can you drive a car with a P0010 code? – Related Questions
How do you fix the engine code p0010?
For a professional mechanic, resolving this error code is as simple as cleaning or replacing the damaged parts correctly. This is especially the case for repairing camshaft timing components, which may include taking the timing chain apart to replace a malfunctioning actuator.
How much does it cost to replace a valve actuator?
The average cost for variable valve timing actuator replacement is between $745 and $864. Labor costs are estimated between $456 and $575 while parts are priced at $289. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
Where is the variable valve timing actuator located?
The variable valve timing solenoid is located at the front of the engine, typically near the front of the valve cover.
Where is cam actuator located?
The intake camshaft actuator features a gray electrical plug and is located closer to the front of the vehicle on the top of the cylinder head. When your factory intake actuator begins to fail your car’s computer may trigger fault codes P0010 or P011 resulting in a check engine light.
The Camshaft Position sensor is typically located in the cylinder head of the engine and has a cylindrical portion that inserts into the head. The Crankshaft Position sensor is normally located in the timing cover or on the side of the block with a cylindrical portion that inserts into the block.
Where is the intake actuator?
The Intake Manifold Actuator is mounted on an Intake Manifold that acts as a passage of air that is sucked into the cylinder of the engine.
What happens if air intake is blocked?
Misfiring engine – A blocked air intake can lead to overly rich air/fuel mixture. This can foul / flood the spark plugs and cause your engine to misfire.
Can a broken air intake damage your engine?
Without a functional air filter, dirt and debris can easily enter the turbocharger, causing extreme damage. To make things worse, metal from the failed turbocharger can find its way into the engine, circulating throughout the system. This can result in complete engine failure.
What are the symptoms of a faulty air intake?
Common signs include a reduction in power, acceleration, and fuel efficiency, excessively high idle, and the Check Engine Light turning on.
How do you unclog a car air intake?
How to Clean a Car Air Filter in Just 8 Quick & Easy Steps
Get access to the air filters.
Remove as much loose filth as possible.
Vacuum away all the finer filth.
Apply the air filter cleaner.
Scrub the cleaning solution with a brush.
Rinse the cleaning solution off with water.
Dump out the water and let them drip dry.
How do I test my air intake?
Can a dirty air filter cause a check engine light?
A dirty air filter is one of the things that can cause your Check Engine light to come on, caused by an inadequate supply of air to the engine that results in a buildup of carbon deposits. Have your mechanic scan your vehicle to track down the source of the problem, as it could be as simple as replacing the air filter.
HOW DO YOU KNOW IF YOU’RE DRIVING WITH A CLOGGED FUEL FILTER?
You have a hard time starting car. If the problem is the fuel filter, and it isn’t changed soon, you may find that your vehicle won’t start at all.
Misfire or rough idle.
Vehicle stalling.
Fuel system component failure.
Loud noises from the fuel pump.
Can low oil make the check engine light come on?
Low oil pressure
Low oil pressure is a common cause of a check engine light turning on, and it can seriously interfere with your car’s performance.
How often should engine air filter be replaced?
You should change the air filters at least once a year or every 12,000-15,000 miles, whichever comes first. If you drive in dusty/dirty conditions, you may be required to change your filter more often. Some filters are marked with a service life indicator that changes color when it’s time to be replaced.
How do I know if my engine air filter needs replacing?