What do I need to do to have my car retested? If your car has failed its MOT, it will need to be re-tested for MOT certification. An MOT retest or partial MOT retest can be carried out within ten working days. This ensures you have enough time to make any required repairs prior to the retest for a pass.
Do I have to pay for another MOT if it fails?
You’ll only need a partial retest if you take the vehicle from the test centre for repairs and take it back within 10 working days. You can be charged a partial retest fee for this. In all other cases, you’ll need to get a full retest and pay the full MOT test fee again.
Make sure to book an appointment before your certificate runs out, as driving a car without an MOT is illegal. Even if you are accidentally driving without an MOT, you could still get fined.
Can you still drive your car if it fails MOT? – Related Questions
How long do you have between MOT and retest?
Failing an MOT test
After 21 days a full test fee will be needed. Re-tests must be completed within 60 days of the original test. If your vehicle fails an MOT test it is treated as not being roadworthy and it should not be on the road, regardless of whether you have time remaining on an existing MOT certificate.
How long can I drive my car after MOT expires?
If your car has failed its MOT, you can only continue to drive it if the previous year’s MOT is still valid. This could happen if you take your car in for a test a few weeks early, for example. You can still drive it away from the testing centre or garage if no dangerous problems were identified during the MOT.
How long before MOT expires Can I retest?
An MOT can be carried out up to one calendar month prior to the expiry date of the existing MOT certificate, while still preserving the anniversary of the expiry date. If a test is carried out a month before the due date, the MOT is effectively valid for 13 months.
Can you drive with a major defect on MOT?
Major defects will cause your vehicle to fail its MOT and must be repaired immediately, but they don’t mean the vehicle is unroadworthy. So, if your current MOT certificate is still valid and no dangerous defects were found, you can drive it to somewhere to get it fixed.
The minimum legal tyre tread depth is 1.6mm and any tyres with less than this will be marked as an MOT ‘fail’ (though it’s recommended that tyres are changed when tread reaches 3mm). If you’re in doubt about how much tread is left on a tyre, your local manufacturer main dealer can check for you.
Does an engine light fail an MOT?
Yes, your car will fail its MOT if your Engine Management Light remains on when the engine has been started. Under the new MOT rules, it is now classed as a major fault. There are many reasons why your EML might be on, some more straightforward than others.
Does MOT check structure?
Structure and attachments (including exhaust system and bumpers), and body and interior (including doors and catches, seats and floor) rules and inspection for car and passenger vehicle MOT tests.
Do they check your boot in MOT?
A general inspection of the body, chassis, engine mountings, seats, bonnet, boot and doors will be checked making sure all components are free from excessive corrosion with no sharp edges that might cause injury.
Do doors need to open for MOT?
Doors must open and close. The door catch must retain the door securely in the closed position. Front doors should open from inside and outside the vehicle. Rear doors may need to be opened to gain access to testable items such as rear seatbelts.
How is the handbrake tested at MOT?
Parking brake (‘handbrake’)
The parking brake lever’s mountings will be checked for security and/or corrosion. On electronic systems a parking brake warning light illuminated is a failure. A parking brake lever must have obvious excessive travel before being rejected.
An average MOT test takes between 45 and 60 minutes, but there are a couple of other things to take into consideration. First, if your vehicle fails the test and repairs are needed this will take longer.
How many times should a handbrake click?
A normal handbrake should take between 5 and 8 clicks – more than this and it could be too tight, causing damage to the rear brakes and less than 5 means it’s likely to be dragging and could fail completely.
What is the max brake disc run out?
The maximum amount of tolerance for brake disc runout is >0.08mm. The runout reading from the nearside front 0.2mm which indicates that the brake disc has excessive lateral runout.
What causes brake disc run out?
Brake disc run-out can be caused by a skewed seating relative to the hub, which in turn may be the result of contamination of the seating surface or deformation. Another cause of misalignment is wheel bearing play or caliper misalignment.
How do you check brake discs?
How is brake runout checked?
Run out needs to be measured with a dial indicator with the rotor mounted on the vehicle however, DTV can be measured using a precision micrometer off the vehicle. This is done by measuring the thickness of the rotor 25mm in front of the outer edge.