Buick Enclave Transmission Issues
Transmission problems are common on all Enclaves, but the 2008 model has the most complaints. Owners have mostly noted transmission problems around 91,000 miles. The vehicle tends to shake, make clunky noises, or both when speeding up or changing gears.
How much is a new transmission for a Buick Enclave?
In general, you can expect to pay between $3,500 and $6,000 in Buick Enclave transmission replacement costs.
What kind of transmission is in a Buick Enclave?
Why does my Buick Enclave shake when I accelerate?
Common reasons for this to happen:
Tires begin to behave differently when worn or out of balance. Tire replacement, realignment, and rebalancing are common solutions. Engine firing issues: When one or more of your spark plugs isn’t firing correctly, it can cause your car to vibrate.
Do Buick Enclaves have transmission problems? – Related Questions
Why is my Buick Enclave jerking?
When a fuel pump begins to fail, it may struggle to consistently deliver the correct amount of the fuel to the engine. The fuel pump may dramatically increase pressure while failing, creating a jerking or surging sensation. Your vehicle may also be sluggish and struggle while driving uphill or towing.
Why does my car feel choppy when I accelerate?
There are a range of reasons why your car is juddering when you accelerate. Your vehicle could have dirty fuel injectors, a damaged fuel pump, a blocked catalytic converter, a faulty mass airflow sensor, broken spark plugs, or even an accumulation of moisture.
Why does my car vibrate and shake when I accelerate?
Vibration is usually caused by an out of balance or defective tire, a bent wheel or a worn driveline U-joint. You may find that the car shakes the car in an up and down motion. You may feel vibration through the seat, the steering wheel or even in the brake pedal.
Why does my car shake when I accelerate on the highway?
If your car shakes as your speed increases, then you should get your tires checked out. vehicles width should be balanced evenly across the entire width of your tires, if this isn’t the case, then one side of the tire is carrying more weight than the other.
Why does my car shake between 60 and 70 mph?
When your car vibrates every time you drive at 50-70 mph, it is most likely that your wheels are out of balance. The vibrations will emanate from the steering wheel across the seat and through the vehicle’s floor.
Can dirty transmission fluid cause shaking?
Low automatic transmission fluid can cause shaking. If the shaking is accompanied by the check engine light, it’s time to visit a mechanic.
Why does my car shake between 50 and 60 mph?
The most common reason for a car to shake is related to tires. If the tires are out of balance then the steering wheel can shake. This shaking starts at around 50-55 miles per hour (mph). It gets worse around 60 mph but starts to get better at high speeds.
Why does my car shake when I accelerate but stops once I let off the gas?
Shaking is usually caused by some kind of imbalance with the engine and its combustion cycles. This may be a problem with the fuel You should inspect the rear driveshaft U-joints to see if the joints are bad. You may see where the joints are loose or rust around joints.
Why does my front end shake when I go over 50?
The most common cause of vehicle shakes at 50 mph or higher is tire balance. Again, transmission or drive lines can cause this, but the tires should be the first thing to have checked.
What does drive shaft vibration feel like?
Shuddering While Accelerating
Loose U-joints or bad center bearings within the driveshaft can cause a worrisome shuddering as you accelerate. This may also be accompanied by unusual sounds. If the car or truck feels like it’s faltering or shuddering when you press the gas, take it in to have the driveshaft checked.
What are the signs of a failing drive shaft?
Signs of a bad driveshaft/drivetrain
- Vibrations from under the vehicle. A common symptom of a failing driveshaft is an intense shaking coming from underneath the vehicle.
- Difficulty turning.
- Loud clunking noise.
- Car shudders upon acceleration.
- Squeaking noise.
- Clicking or knocking noise.
What are the 3 most common things that can cause vibration in a drive shaft?
Some of the most common causes of vibrations in the driveline are slip splines or U-joints being worn, components that are out of balance, misaligned angles or out of phase yokes, getting close to the critical speed range, or yoke ears that are not coordinated with the splines.
What does a failing drive shaft sound like?
Second, If the bushing or bearing that supports the drive shaft or the drive shaft U-joints wear out or fail, they can interfere with the unit’s ability to rotate correctly. This may result in unusual rattling, clunking, or even scraping sounds from underneath the vehicle.
What is the most common drive shaft problem?
Vibrations and shuddering are the most common sign of a failing driveshaft. If the bushings or U-joint wear out you can experience excessive driveshaft vibration. This may also result from the driveshaft not being bolted down properly or the unit being out of balance.
Is it worth fixing a drive shaft?
The Drive Shaft Repair process is very important. If your vehicle has issues more often than not the drive shaft can be problematic and you have to fix it. If the driveshaft just doesn’t work the way it should, it can end up being super demanding and your vehicle will malfunction more and more.
What sound does a hard drive make when it is failing?
If you hear a grinding sound coming from your hard drive, power it down as soon as possible; the head will continue to cause damage to the platter and erase your data until you do. Yes, some clicking is normal but repeated loud clicking is usually a sign of head failure.