In the end, when used correctly with the proper understanding and technique, using snow foam for both general vehicle maintenance washes and more intensive decontamination washes is an extremely effective procedure that can largely minimize wash induced scratches and allow for an overall improved, thorough and safer
This is what’s known as contact time. Because of this increased contact time compared to regular soap and water, snow foam is better at breaking down dirt and lifting it off the surface of your car, which in turn makes your regular car wash much more effective.
Using a foam gun as a form of pre-washing a car is a fantastic way of getting a base layer of suds applied in a very short period of time. The more aggressive the foam, the more lubrication you’ll produce, further reducing the risk of swirl marks and surface scratches, and other unpleasant car wash encounters.
Do foam car cleaners work? – Related Questions
Do you hand wash after foam gun?
After the foam cannon is used, you should use a fresh wash mitt to go over your car.Once this is done, you should spray your car down with regular water then wipe it dry. The big difference between a foam cannon and hand washing is the application of soapy water.
Do you need to scrub after using a foam cannon?
It’s the soap that really does all the work to remove dirt –no scrubbing required. Since a foam cannon applies much more soap than a wash mitt ever could (even those that hold a lot of suds), you really don’t have to use any pressure at all when using a mitt.
What is better foam gun or foam cannon?
Whereas a Foam Cannon will lay down a thick shaving-cream-like layer of white foam over the entire surface, the Foam Gun with a water hose simply does not have enough water pressure to create such a thick foam, but it will still cover the surface in thick suds to help loosen and lift dirt more easily.
What are the benefits of a foam cannon?
People use them for all sorts of things, but when attached to a foam cannon, they will shoot insane amounts of suds that will make any driveway look like a winter wonderland. Thick foaming suds lubricate the surface of your car, allowing your wash mitt to glide over the surface without installing swirls or scratches.
The time and cost of snow foaming a car is considered worth it for most detailer and enthusiasts as it helps to prevent scratches and swirls from occurring during the wash process which can be hard to remove. However, it does depend on the snow foam being used as some are more effective than others at cleaning.
Can you use regular car wash in a foam cannon?
Can You Use Regular Car Wash Soap in a Foam Gun? Regular car wash soap and car shampoo can be effectively applied with a foam gun. Car soap mixes with water in the foam gun’s canister to produce a frothy mixture. The frothy mix is then released onto the car via a spray nozzle for a pre-wash preparation or a quick wash.
Should I rinse my car before foaming?
You should always begin your car cleaning process with a pre-wash. Always rinse your car with a pressure washer or snow foam your vehicle before making the first contact. The chances of causing swirl marks are very high if you try scrubbing the dirt off a dry car.
Can I use shampoo in a foam cannon?
Can You Use Shampoo as a Snow Foam? Car shampoos do not usually work well in snow foam cannons because they don’t foam up well and the concentration of cleaning agents is usually too weak. Unless a very high ratio of shampoo to water is used in the cannon, the foam will be very thin and have poor cleaning ability.
Is there special soap for foam cannon?
Adam’s Mega Foam 16oz – pH Best Car Wash Soap For Foam Cannon, Pressure Washer or Foam Gun | Concentrated Car Detailing & Cleaning Detergent Soap | Won’t Strip Car Wax or Ceramic Coating.
The best all-purpose soap is this car shampoo by Adam’s Polishes. You squirt a few ounces (100 – 150 ml) in your foam cannon bottle and fill it with water. After that, you’re ready to foam the car. It is pH neutral and won’t strip the wax or be an issue using in the sun.
What is best soap for foam cannon?
Top 10 Foam Cannon Soap Reviews
Chemical Guys CWS_110 Snow Foam Car Wash Soap.
Meguiar’s Gold Class Car Wash Soap.
Adam’s Polishes CWS Foam Car Shampoo.
Chemical Guys Mr.
Mothers 05674 California Gold Foam Wash & Wax.
Adam’s Polishes Mega Foam Car Soap.
Sun Joe SPX-FCS1G-CRM Snow Foam Car Wash Soap.
How do I make my foam cannon more foamy?
Why does my foam cannon not foam?
Getting watery foam or no foam at all? There are many factors that would result is your foam cannon not working correctly, most often it’s because of not rinsing the nozzle after use. This simple step after use can and will ensure your foam cannon shoots out thick suds for a long time! Seriously, it works.
Do you dilute soap for foam cannon?
You’ll want to add 10 parts water to 1 part car wash shampoo to the cannon canister. Undiluted soap will not flow well up the intake hose. It also won’t produce the best thick foam and will waste a lot of product. Once you’ve added the soap and water to the foam cannon bottle, you will want to mix it thoroughly.
Does a foam cannon need a pressure washer?
Using a foam cannon requires two things; a pressure washer with sufficient pressure and volume to run the cannon and chemicals that are designed to be used with a foam cannon.
Are car wash foam cannons worth it?
It just doesn’t work nearly as well. Using a foam gun is more like dumping a bucket of soapy water on the surface. Sure, it spreads suds all over your car but they’re nowhere near as thick and won’t cling to the paint as well. A foam gun isn’t as effective but it’s better than nothing.