You should always begin your car cleaning process with a pre-wash. Always rinse your car with a pressure washer or snow foam your vehicle before making the first contact. The chances of causing swirl marks are very high if you try scrubbing the dirt off a dry car.
You simply spray the car until it’s coated in foam, leave it for five-minutes (not in direct sunlight), then return to rinse it all off with the regular lance back on your pressure washer. During those five minutes, the foam should lift off the nastiest bits of dirt, taking the grime with it when it’s power-washed off.
A 5 litre bottle of snow foam should last you around 6-8 months if not more depending on how often you wash your car(s).
Do you rinse after snow foam?
Unlike a car shampoo, snow foam doesn’t contain any lubricant to help cloths glide over your car’s surface, so wiping it off can cause scratches on your paintwork. Always rinse off your snow foam with a hose or a pressure washer.
Do you rinse the car before snow foam? – Related Questions
Does snow foam actually work?
Often, a regular wash and wax treatment just won’t be strong enough to get the job done properly on its own. Snow foam helps your car washing routine by partially breaking down dirt on your car’s paintwork, wheels, and other surfaces, making it much easier for your regular car shampoo to finish the job.
How long should you let snow foam sit on car?
Let the Foam sit for about 10-15 minutes at least to let it do its job. If you try to wash it off too quickly, chances are it will not have had a chance to loosen any of the dirt on the surface of the car. The longer you leave the foam in place the more dirt it can pull away from the surface of your car.
Can snow foam damage your car?
Snow foam is not bad for the paint, as long as you’re using a product specifically designed to use on a car. The only problem you can run into, is letting it dry on the surface without rinsing it off.
After the foam cannon is used, you should use a fresh wash mitt to go over your car.Once this is done, you should spray your car down with regular water then wipe it dry. The big difference between a foam cannon and hand washing is the application of soapy water.
Can I use car shampoo as snow foam?
Yes I always use car shampoo by foam lance and get nice result Foam > Jetted off > Foam whole car and enjoy with your wash mitt . If you want strong shampoo to remove dirt as pre wash try Armor all Heavy Duty Shampoo via Foam lance :thumb: Click to expand
What’s the difference between car shampoo and snow foam?
Snow foams provide little lubrication, as they are not designed to be agitated with a wash mitt. Car shampoos on the other hand, contain chemicals designed to lubricate the paintwork, and are more “gel-like”, in comparison to snow foams when mixed with water.
Do I need a pressure washer to use snow foam?
You can apply a snow foam to a car without a pressure washer by using a hand-held foaming pump sprayer or a foam cannon which attaches to directly to a garden hose. The snow foam can also be applied to the car using a regular spray bottle which will achieve the same cleaning effect, but without producing any foam.
Do I need special soap for foam cannon?
You should only use car soap (obviously). To get thick foam from your foam cannon, you must choose a car soap which is high sudsing and highly concentrated.
Our top pick is the Chemical Guys Honeydew Snow Foam Car Wash Soap, which can be used on a variety of surface areas and is pH neutral, so it won’t harm any protective coatings, such as wax or sealants.
Do you dilute soap for foam cannon?
Here’s how it works: Mix 1 – 3oz of your favorite Chemical Guys soap and water into the canister of the foam cannon. We always use warm water because it helps the aerate mixture better. Reattach the canister to the head of the foam cannon.
Should I dilute snow foam?
Perhaps the most critical aspect of a snow foam is the dilution ratio. Whether it’s coloured snow foam or not, you don’t want to make the mistake of using an overly concentrated mixture. Most professionals will advise you to mix snow foam and water in a 1:10 ratio.
What is the mixing ratio of a foam cannon?
A typical ratio of soap to water in a foam cannon reservoir is 10 to 1. The ratio can vary quite a bit depending on how concentrated the snow foam shampoo being used is and other variables such as pressure washer gallons per minute, pressure, and foam cannon nozzle design.
How much soap should you use in a foam cannon?
Put 3 to 4 ounces of foam soap into your Foam Cannon reservoir, and fill the rest with water. Shake well to mix the soap into the water. Using a car safe pressure washer tip, thoroughly rinse the vehicle, making sure to spray off any large clumps of dirt or debris.
How do you mix a foam cannon car wash?
What is the point of a foam cannon?
A foam cannon is a piece of car washing equipment that mixes the perfect amount of car wash soap, water, and air to generate thick suds, then shoot them all over your car using the power of a pressure washer.