Even though this midsize SUV was given some fairly reliable engines at the factory, many owners do you report having problems with their 42RLE transmission. The most common of these Jeep liberty transmission problems is slipping between gears, or a noticeable delay between shifts.
How much does it cost to replace a transmission in a 2012 Jeep Liberty?
2012 Jeep Liberty Transmission Cost
The cost of a new 2012 Jeep Liberty transmission could be over $3,500 depending on the car, yet, transmission services such as fluid changes and a transmission fluid flush are considerably less costly, in some cases costing less than $150.
What are early signs of transmission failure?
What Are the Transmission Failure Symptoms?
- Refusal to Switch Gears. If your vehicle refuses or struggles to change gears, you are more than likely facing a problem with your transmission system.
- Burning Smell.
- Noises When in Neutral.
- Slipping Gears.
- Dragging Clutch.
- Leaking Fluid.
- Check Engine Light.
- Grinding or Shaking.
What problems does a 2012 Jeep Liberty have?
Top 2012 Jeep Liberty Problems
- Check Engine Light/Misfire Due to Intake Valve Locks/Valves.
- Power Window Motor May Fail Due to Regulator Assembly.
- The Sky Slider Sunroof May Not Open.
- Engine Will not Start Due to Wireless Control Module Fault.
- Front/Rear Differential Pinion Seal/Transfer Case Leaks are Common.
Does a 2012 Jeep Liberty have transmission problems? – Related Questions
What is the recall for on a 2012 Jeep Liberty?
Chrysler (FCA US LLC) is recalling certain 2012 Jeep Liberty and 2012-2013 Chrysler 200 and Dodge Avenger vehicles. A component within the occupant restraint controller (ORC) may fail and prevent the active headrests from deploying in the event of a rear-end crash.
How many miles can a 2012 Jeep Liberty last?
Typically, a Jeep Liberty can last anywhere from 10-15 years or 200,000 to 400,000 miles.
What are the most common problems with Jeep Libertys?
The most reported problems with the Jeep Liberty were the fluid leaks, illuminating check engine lights, and misfires due to the faulty intake valves – and that’s just a few of its mechanical woes. The Jeep Liberty was introduced and was technically the third generation of the Cherokee.
Is a Jeep Liberty a reliable car?
Jeep tends to be middle of the pack in terms of reliability and the Jeep Liberty is no exception to this rule. The Liberty gets average reliability ratings—meaning that it might experience some problems within the first few years of ownership but it’s pretty unlikely to break down completely.
What year Jeep has transmission problems?
Jeep Cherokee Transmission Problems
The Jeep Cherokees that were included in the recall included the 2014 – 2017 models.
What year Jeeps have transmission problems?
Torque converter and overdrive problems are most common in the 42RE, 42RE four-speed, and 42RLE transmission found in the Wrangler model years 2000 and later.
What year Jeep should I avoid?
When looking at the worst-performing models of the Jeep Wrangler, 2012 took the win. Among the issues it had, there have been 9 recalls, making it the worst for Jeep. The 2007 and 2008 Jeep Wranglers are not too far from that, as they have 10 and 9 recalls, respectively.
How do you know if your Jeep transmission is going out?
3 Signs Your Chrysler, Jeep, Dodge, or RAM May Need a Transmission Repair
- You Hear Knocking Sounds When You Accelerate Quickly.
- You Smell Something Wrong.
- You Notice Erratic Gear Shifting.
How do I know if my transmission is going bad in my Jeep?
Shifting is rough.
This common symptom of a failing transmission is easily noticed. If your transmission is having a tough time shifting into other gears, or refusing to do so completely, you’ve got a bad transmission and it’s time to schedule an appointment at your local dealership.
How does a car act when the transmission is going out?
Grinding, Jerking, or Shaking
Shaking and jerking are good indicators of transmission trouble. Gear grinding is a common symptom in manual transmission vehicles. Automatic transmission failure often begins with some hesitation during gears shifting. Some might describe this a “slipping,” as well.
How can I test my transmission?
Another way to look for transmission problems is to hold down the brake pedal with one foot while stepping on the gas pedal with the other foot so you can rev up the engine. Make sure the parking brake is on during this time, and don’t rev the car for longer than a few seconds.
Can a transmission go out without warning?
Major transmission repair requires disassembling, inspection, cleaning, and rebuilding. It’s labor intensive and cost prohibitive. Luckily, transmission failure doesn’t usually happen without warning. There are several warning signs that your transmission’s going out.
What noise does a failing transmission make?
If the sound resembles humming, buzzing, or clunking, you may be experiencing transmission failure. Bad automatic transmissions may emit humming, buzzing, or whining noises while manual transmissions have harsher “clunking” sounds.