The POR-15 3-Step Stop Rust System is designed to stop rust on metal surfaces and ensures the best results when applying POR-15 Rust Preventive Coating. Prepare and prime bare metal or directly paint rust with confidence.
POR-15 Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants and is able to be painted over rust.
Is Por 15 metal prep necessary?
Is it always necessary to apply Metal-Ready first before using POR-15 Rust Preventive Paint? No.
What is better rust bullet or POR-15?
While products like POR15 simply provide a coating on the car surface, the Rust Bullet products are specifically designed to penetrate the metal surface and mix with the rust.
This procedure is the most common and most recommended method of rust proofing, as it’s able to fully rust proof your vehicle by penetrating all the small nooks and crannies.
Is POR-15 better than Rustoleum?
While Rustoleum has been around for longer, POR-15 offers a more comprehensive product for rust. However, both will get the job done, so it’s up to you to decide!
Does POR-15 cause rust?
POR15 is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won’t chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture.
How do you use POR-15 in rust?
Does POR-15 have a hardener?
Like many other POR-15 coatings, Glisten PC is a moisture-cured coating, which means it is strengthened by exposure to moisture. Your Glisten PC purchase consists of 2 items: 1) A paint can, labeled Glisten PC, which is the basic clearcoat formulation, and 2) A smaller can, labeled Hardener/Activator.
What does POR-15 Metal Prep do?
POR-15 Metal Prep provides the best adhesion for POR-15 Rust Preventive Coating and any opaque primer or top coat paint. Metal Prep gently etches metal, creating an ideal anchor pattern for coatings, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint to steel and other metals.
Do you have to paint over POR-15?
MUST I PAINT OVER POR-15 TO MAKE IT LAST? No, but POR-15 has an ultra-violet sensitivity and must be topcoated if continually exposed to sunlight. Once topcoated, POR-15 will remain effective for many years.
That depends on the ambient humidity (surrounding area). The more humid the area, the faster the drying time, which usually varies from 2 to 5 hours.
Do you have to sand POR-15?
It is not necessary to sand POR-15 Self Etch Primer before topcoating. Dry time:It cures to touch in 30-60 minutes. Second coat can be applied in 10-15 minutes, depending on ambient temperature and humidity.
Does POR-15 stick to bare metal?
After thoroughly degreasing your work piece, apply environmentally safe POR-15 Metal Prep to both neutralize any rust and etch any clean bare metal. This metal etching solution will allow better adhesion of POR-15 Rust Preventive Coating or any other coating.
How do you prepare the surface for POR-15?
For proper adhesion to aluminum, galvanized metal, and smooth steel surfaces, prep with POR-15 METAL-READY Rust Remover/PrePrimer. Keep surface wet for 15 minutes, then rinse off with water and dry thoroughly. This process will leave a zinc phosphate coating on the metal and insure perfect adhesion.
What PSI should I spray POR-15?
– You may thin with POR-15 Solvent up to 5% for brushing purposes. SPRAY APPLICATION: – Use 250 KPA (30-35 lbs) pressure for and HVLP gun or 60 psi (414 KPA for a High Pressure Gun) normal gloss.
Does POR-15 need to be thinned when spraying?
This reducer paint works great when thinning POR-15 2k Urethane, POR-15 High Temp, and POR-15 Rust Preventive Coating. Depending on VOC laws in your area, you can thin between 5%-20% when applying with a spray gun or brush.
Allow POR-15 High Temp Coating to cure for 24 hours on the surface before temperature is raised above 300°F for full cure. Dry time: Cures to touch in 4 hours. Second coat can be applied in 24 hours, depending on ambient temperature and humidity.
How much will 1 quart of POR-15 cover?
POR-15 forms a rock-hard coating that won’t crack, chip, or peel, and it gets stronger when exposed to moisture. One quart will cover 96 square feet. coats including lacquer-based paints.
What is the difference between POR-15 and POR-15 Top Coat?