The 2012 Subaru Forester is the number five most likely vehicle to need an engine rebuild. CR says the typical mileage for this to happen is between 81,000 to 129,000 miles. According to Consumer Reports, some Subaru Forester owners chronicled their problems with oil consumption.
Is Subaru Forester 2012 reliable?
The 2011- 2019 Forester model years have average to good reliability, and the 2020-2021 models have better than average reliability.
How long will a 2012 Subaru Forester last?
On paper, your Subaru Forester should still be driving after 200,000 to 250,000 miles, provided you keep up with routine maintenance like oil changes, tune-ups, etc. And it’s pretty common to reach and surpass those milestones without needing to do serious work on them.
Does a 2012 Subaru Forester have a timing belt or chain?
Simply, then, a 1997 to 2011 Forester will have a timing belt, while any of the fourth-gen Foresters (from 2013 or later) will have a timing chain.
Does the 2012 Subaru Forester have engine problems? – Related Questions
What are the recalls on a 2012 Subaru Forester?
Subaru is notifying owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall began on January 25, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru’s number for this recall is TKC-19.
Do 2012 foresters have head gasket problems?
After 2009, newer models using the EL25 2.5-liter engine should have far fewer head gasket problems because Subaru started using a multi-layered steel cylinder-head gasket. Starting in 2012, reports say the Japanese automaker redesigned the 2.5-liter engine in the Forester and Outback and has fixed the problem.
When did Subaru Forester switch to timing chain?
Since 2013, all Subaru engines have been equipped with timing chains rather than belts – except for the high-performance Subaru WRX and WRX STI.
Does Subaru Forester timing chain need to be replaced?
A timing chain is bulkier and louder; however, it does not require replacement. Though a repair might be necessary in some rare occasions, most timing chains last for the entire life of the engine.
When should the timing chain be replaced on a Subaru Forester?
Subaru timing belts need to be replaced after seven years or 105,000 miles; whichever comes first. Replacement cost starts at $530 (will vary by model)
Can a Subaru timing belt last 200 000 miles?
This is a bad idea because the timing belt rides on these pulleys and if one of these components fail, the timing belt may fail with it. The timing belt should be replaced as per manufactures recommendation. For Subaru vehicles it is every 105,000 miles or 10 years.
Is it worth buying a Subaru with over 200k miles?
The current generation 2022 Subaru Forester, Outback, Crosstrek, Ascent, and other new models are among the most reliable new vehicles that will go well over 200,000 miles and, with regular maintenance, have proven to be long-lasting vehicles.
What is the longest a timing belt has lasted?
If the belt fails, the engine can suffer severe damage. That’s why you need to help your customers prolong the lifespan of their timing belts as much as possible. OEM manufacturers have made it possible for timing belts to last as long as 100,000 miles.
What are signs of timing belt problems?
Symptoms of a Bad or Failing Timing Belt
- You Hear A Ticking Noise Coming From The Engine.
- Your Car’s Engine Won’t Turn Over.
- You Notice An Oil Leak Near The Motor.
- You Experience Exhaust Issues.
- Your Revs Start Acting Up.
Is there any warning before timing belt breaks?
You need to look out for signs and symptoms of a weakening timing belt so that you can take action before it is too late. These include loud clicking sounds coming from your engine, squealing sounds, and your engine failing to start at all.
At what mileage does a timing belt break?
It is safer to replace the timing belt even earlier than the manufacturer recommends. In general, however, timing belts needs to be replaced from 60,000 miles up to 150,000 miles.
What happens if the timing belt breaks while driving?
When a timing belt breaks, you will first hear a ton of noise, and then your engine will die completely, leaving you stranded. Even if you’re driving fast on a highway, your vehicle will literally stop running.
Is it worth fixing a broken timing belt?
In a nutshell, a broken timing belt leads to serious engine damage. It is sometimes cheaper to replace the whole engine rather than repair it. Replacing a timing belt ahead of time is so much cheaper than repairing the damage caused by a broken timing belt.
Can a timing belt fail without warning?
Sometimes, a timing belt breaks without any warning. However, there are sometimes signs of damage that can save you a huge amount of time and money if you catch them soon enough. If you notice any of these signs, you’ll need a mechanic to check the condition of your timing belt and other engine components.
Will a broken timing belt throw a code?
If the timing belt breaks or if it has skipped a tooth, this can cause multiple check engine light codes to be stored in your vehicle’s computer system. This will then illuminate the check engine light.
What does a failing timing belt sound like?
Generally, a timing belt that goes bad makes a noticeable ticking or clicking timing belt sound that is unusual. When the timing belt starts falling the ticking or clicking sound becomes pretty audible.