You can try the following to beef up the performance of your C6 transmission:
- Custom Parts.
- Valve Body Upgrades.
- Bell Housings.
- C6 Planetary Carriers.
- First and Reverse Planetary Gearset.
- Lincoln Drum.
- Aftermarket Clutches.
- Gear Ratios.
How much HP can a C6 transmission handle?
According to Kokonis the company uses stock input shafts for applications up to 1,000 hp. Pushing past that limit requires the CK Performance billet input shaft.
Are C6 transmissions good?
Although other transmission types have been used, the C6 has proven to be the workhorse of choice, mainly because of its adaptability to be used behind a number of different tractor applications and power plant configurations.
How many quarts of fluid does a Ford C6 transmission hold?
It requires 7-quarts of Type FA transmission fluid with the stock pan, plus an additional 2–4 quarts for the torque converter.
How can I improve my C6 transmission? – Related Questions
Can you add overdrive to a C6 transmission?
Adding overdrive to a C6 is physically impossible, but the 4R100 can donate its forward planetary gear set for shorter first and second gear ratios. This creates a “wide-ratio” C6.
Which transmission is better C4 or C6?
While both are used by hot rod and drag racers enthusiasts, the C6 has gained favoritism when it comes to offroad driving. The C4 is not quite suitable for off-road since it cannot handle as much power as the C6 and as such, it was mostly used in cars and not trucks.
What kind of transmission fluid does a C6 take?
The C-6 also has a very large fluid capacity at 24 pints, including the fluid in the torque converter. Ford used type FA transmission fluid, which was specific to Ford transmissions until mid-1977 when C-6 transmissions were converted to Dexron/Mercon late in that model year.
How much oil does a C6 hold?
The way I do it is to first level the car, then pour in 6 quarts of new oil, replace the filler cap, and push the dipstick all the way home. I generally give it about 5 minutes to allow the new oil to fill the pan. (CAUTION: Make sure the C5 or C6 is in park if it’s an automatic, or in neutral if it’s a stick.)
How does a C6 transmission shift?
When governor feed oil gets high enough, it will override the opposing oil and the 1-2 shift valves will stroke, thus making the transmission shift from first to second. As road speed increases, so does governor feed pressure.
What is Type F ATF?
Mobil Type F ATF is an automatic transmission fluid which is made from high quality base oils with viscosity index improvers, antioxidants, anti-wear agents, defoamants and special additives to provide the controlled frictional characteristics of a Type F fluid in automatic transmission applications.
What transmission fluid does Ford recommend?
MERCON® transmission fluids undergo extensive testing, both in the lab and in real-world conditions, to ensure they provide optimum performance and durability. MERCON® fluids are the only fluids approved by Ford Motor Company for their recommended application.
Can I mix Type F and Dexron?
As to ATF, no problem mixing Dexron and Type F, one can actually fine tune shift harshness as Type F is in fact “grippier”.
Can I use Mercon V instead of type f?
Mercon is a suitable replacement for Type H and Type CJ fluid, but not for Type F. Mercon V—the most common Ford ATF in late model Fords, it is very much like Dexron III. Should not be used in a transmission requiring Ford Type F. Mercon LV—the latest Ford ATF, it is factory fill in 2008 and later Fords.
Is Synthetic ATF better?
With their improved resistance to the heat and cold, as well as sheer and oxidation, many manufacturers have already discontinued organic-based compounds in favor of synthetics. Synthetic automatic transmission fluids also tend to last longer, making them the overall recommended choice.
Is Mercon V full synthetic?
Valvoline™ MERCON® V Full Synthetic Automatic Transmission Fluid, 1 Quart. ValvolineMERCON®||| V Full Synthetic Automatic Transmission Fluid is recommended for most vehicles.
Can you mix ATF 4 and Dexron?
Yes, you can. The three-speeds can take Dexron II and up, any Chrysler fluid, and they can be mixed. It’s probably better to have all one fluid, but you can add ATF+4. The three speed doesn’t require ATF+4 to function properly; it’s just now the only fluid recommended for all applications.
What can be used in place of dexron 6?
The best trans oil is actually one Allison recommends, a TES-295 synthetic to replace both Dex III and Dex VI.
Can I use Mercon V instead of dexron VI?
This fluid technology is designed to replace and supersede previous generation specifications from GM and Ford such as DEXRON III and MERCON/ MERCON V. General Motors officially states that DEXRON®-VI approved fluids are backwards compatible with and should replace all previous generation DEXRON fluids in service.
Is power steering fluid the same as ATF?
A lot of people ask, “Is power steering fluid the same as transmission fluid?” While ATF and power steering fluid are both hydraulic fluids, ATF features different modifiers and detergents that are specifically designed to remove dirt and grease from the transmission system.
What happens if you put motor oil in a transmission?
Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.