For a professional mechanic, resolving this error code is as simple as cleaning or replacing the damaged parts correctly. This is especially the case for repairing camshaft timing components, which may include taking the timing chain apart to replace a malfunctioning actuator.
Code P0010 is triggered when the ECM attempts to adjust the Bank 1 intake camshaft timing by utilizing one of these valves, and it detects an electrical issue in either the circuit going to the valve or the windings of the solenoid in the valve itself.
What does P0010 permanent code mean?
What Does the P0010 Code Mean? Code P0010 stands for “A” Camshaft Position Actuator Circuit (Bank 1). The code indicates that your car’s primary computer, which is also referred to as the powertrain control module (PCM), perceives a problem with one of the engine’s VVT solenoids.
How much will it cost to fix? It’s hard to estimate the cost to fix this engine code since it can be triggered by a range of mechanical and electrical issues. The cost to diagnose the exact problem will be between $75 and $150, depending on the shop.
How do I fix error code P0010? – Related Questions
How do you reset a camshaft position sensor?
How to reset the camshaft position sensor? Evidently, you cannot reset a camshaft position sensor. Therefore, you will need to replace the component if your camshaft malfunctions (check engine light on, acceleration issues, sputtering and stalling, etc.).
What are the symptoms of a camshaft sensor?
A glowing check engine light, stalling, poor acceleration and bad fuel mileage are all possible signs your camshaft position sensor may be failing. Gone are the days of carburetors and distributors, replaced by a variety of sensors that help a car’s computer get the maximum performance out of the engine.
How much does it cost to replace a valve actuator?
The average cost for variable valve timing actuator replacement is between $745 and $864. Labor costs are estimated between $456 and $575 while parts are priced at $289. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
Is P0010 intake or exhaust?
The P0010 code stands for “Intake Camshaft Actuator Circuit Open/Short on Bank 1”. Put simply, it means that there’s an issue with the electrical components that govern the intake camshaft in your engine.
The exhaust camshaft actuator features a black electrical plug and is located closer to the rear of the vehicle on the top of the cylinder head.
What does a camshaft position actuator solenoid do?
A camshaft actuator solenoid is normally installed in the front of each cylinder head. It is used to precisely control the flow of oil into the camshaft actuator. This changes the rotation of the camshaft to adjust valve timing and valve overlap on the go.
What happens when I cam position sensor goes out?
Car Will Not Start: Over time, as the camshaft position sensor fails, the signal it sends to the engine control module weakens. When the engine no longer receives the signal, you will not be able to start your car. Engine Misfires: A failing camshaft position sensor can cause your engine to misfire.
What happens if a VVT actuator fails?
When the VVT solenoid is malfunctioning, the entire system can be compromised, which may result in intake and exhaust valves opening and closing at the wrong time. This typically causes the fuel economy to drastically reduce.
Can I drive with a camshaft position sensor problem?
The short answer is yes, it is safe to drive with a bad camshaft sensor, but it’s not good for your engine long-term. You’ll likely see a higher fuel consumption and poorer engine performance the longer you wait to get it fixed.
What causes a cam sensor to malfunction?
There are a number of reasons your camshaft sensor might break down: grime and oil in the engine, water damage, bad wiring, and overheating can all cause a camshaft sensor to go bad. The biggest thing to do to avoid this is to take care of your car.
Definitely don’t submerge the sensor. Cam/Crank sensors are usually hall-effect magnetic sensors that wear over time due to heat. Cleaning them will not commonly make them work any better.
Can a car run without cam sensor?
A lot of engines can run without problems with a bad or disconnected cam sensor, what is very important is the crank sensor’s input to the ECU and without that the engine will not start.
Can I replace a camshaft position sensor myself?
It may be easiest to remove and replace the camshaft sensor from under your vehicle, but it can also be done from the top by removing the air filter housing.
Does camshaft sensor affect idle?
Yes cam timing can affect the idle, the cam sensor is the input to the computer telling it the position of the camshaft. If the input from the cam sensor is incorrect the computer will not be able to control the cam position correctly via the variable timing solenoid.
Can low oil cause camshaft position sensor?
If the oil level is very low, to the point where the engine overheats however, yes. Excessive heat can cause a camshaft position sensor to fail. More likely in a “low oil level” situation is for the camshaft, lifters, or camshaft variable timing actuator to fail due to inadequate oil pressure and lubrication.