What are common problems with 2010 Chevy Traverse?
Problems found on the 2010 Traverse are severe and include engine failures, worn-out power steering systems, and issues with the air conditioning.
Engine failures are the most common problem reported by owners at around 100,000 miles.
Power steering system problems show up on a lot of models in the first 80,000 miles.
How much is a timing chain for a 2010 Chevy Traverse?
The average cost for a Chevrolet Traverse timing chain and gear set replacement is between $2,080 and $2,418. Labor costs are estimated between $1,296 and $1,635 while parts are priced at $783.
Is there a recall on a 2010 Chevy Traverse timing chain?
There aren’t any timing chain recalls for any model year of Chevrolet Traverse. But if you’re not sure if your Chevy Traverse has an active recall, you can visit the National Highway Transportation Safety Administration’s recall check site and enter your car’s VIN.
How do I fix the code P0008 on a 2010 Chevy Traverse? – Related Questions
What are the symptoms of a failing timing chain?
Signs of a Faulty Timing Chain
Rattling Sound on Starting the Engine or Idling. A common finding in a vehicle with a bad timing chain is unusual rattling noise when the engine is started or when brakes are engaged.
Misfiring Engine.
Contaminated Engine Oil.
Check Engine Light.
Inability to Start the Engine.
Is it worth fixing a timing chain?
If your timing chain breaks while you’re driving, your vehicle’s engine is likely to suffer catastrophic damage. If you detect any of the danger signals described above, the best way to avoid major engine damage is to have your timing chain replaced by a skilled mechanic.
How much is a timing chain for a traverse?
How much does timing chain replacement cost? A mechanic can replace a timing chain for between $1,600 and $1,800, or you can do it yourself for between $600 and $800. Due to how hard it is to replace this part, the price is high.
How does a car act when the timing chain is going out?
The engine misfires. Once a timing chain is stretched and has lost its integrity, the chain may skip a gear and lose the necessary coordination leading to an engine misfire. Repeated misfires could indicate a timing chain issue and should be investigated. There is a rattling sound.
Driving with a bad timing chain could give you serious engine damage, and it’s also dangerous because it could cause your vehicle to stop suddenly without warning. A timing chain typically requires replacement anywhere from 40,000 to 150,000 miles.
Will a broken timing chain destroy my engine?
A broken timing chain will cause an engine to not start or fail while driving. If the belt is already broken, the engine won’t have enough compression to start. If it breaks or jumps while driving, the pistons will be damaged from contact with the valves. The valves themselves will bend and potentially ruin the engine.
Will a bad timing chain throw a code?
Hi there – yes, a worn or stretched timing chain, weak timing chain tensioner, or worn timing chain guides can cause misfiring, cam timing problem codes, low power and generally poor running of the engine. Most, if not all, of these problems will illuminate the Check Engine light.
Will check engine light come on for timing chain?
A stretched timing chain contributes to poor engine performance and increased emissions, triggering the check engine light and the storing of a diagnostic trouble code. A mechanic will need to inspect the code and prescribe the necessary repairs.
How do I test a timing chain?
Should I fix timing chain or replace engine?
If the engine has been well-maintained then there really is no reason to install a new engine. This engine can last 100,000 more miles if it was well-maintained. If it hasn’t been well-maintained, then I would replace the engine instead of wasting time on the chains.
Timing chain noise is commonly most noticeable during cold startup of the vehicle when oil pressure and oil flow is at its lowest. Excess slack in the timing chain can cause a rattling sound or even a clanking sound if the slack is severe enough to cause the chain to contact the timing chain cover.
How long can you drive with a rattling timing chain?
Not for very long, most timing camshaft chains should be changed about every 100 thousand miles providing the engine oil has been changed regularly but if your cam chain is rattling badly then you shouldn’t wait until it snaps because you will be presented with a heavy repair bill and especially if the valves smash
How do I quiet a noisy timing chain?
That’s because the only real way to stop the timing chain rattling is to replace the part that is causing it to happen. In some cases, multiple parts, or even the entire system, may have to be replaced.
Can low oil cause timing chain to break?
The most common cause of timing chain stretch is lack of maintenance and regular oil changes. Worn out oil can no longer lubricate the chain and will cause the rollers and links to wear against each other.
What oil is best for timing chains?
AMSOIL fights timing chain stretch
If you drive a T-GDI engine that’s known to suffer from timing chain stretch, like the 3.5L EcoBoost, it’s best practice to use a good synthetic oil, like AMSOIL synthetic motor oil, and a quality oil filter to help fight soot-induced timing-chain wear.
Can you fix a timing chain by yourself?
You may find the need to replace your timing chain at some point; however with the right tools, a service manual and some mechanical know-how, you can do it yourself. Just be aware that this is a major job and can have serious consequences for your engine if done incorrectly.
Does changing oil help timing chain?
Following the completion of a successful timing chain system repair, the best thing you can do for your new timing system and engine is to maintain it with clean, high-quality oil. Clean and sufficient oil is the key to getting maximum life from your timing system.