The Ford F-150 10R80 automatic transmission developed jointly between Ford Motor Company and its historic rival, General Motors can be found in the Ford Expedition, Ford Mustang, Ford Ranger, Lincoln Navigator and abroad, the Ford Everest.
What is transmission code 6?
The following table shows the transmission code along with the transmission description.
How do I identify my Ford f150 transmission? – Related Questions
What does VIN code R mean?
A, B, C, D, E, F, G, and H are made in Africa. J, K, L, M, N, P, and R are made Asia. S, T, U, V, W, X, Y, and Z are made in Europe. 1, 2, 3, 4, 5 are made in North America. 6 and 7 are made in Oceania.
What does Raptor R mean?
The Raptor is Ford’s off-roading super-truck version of the F-150. The Raptor R is an even more extreme version of it. It packs the supercharged 5.2-liter V8 from the Shelby GT500 that puts out 700 horsepower and 640 lb-ft of torque.
How do you reset the TCM on a Ford F150?
Where is the RPO code on a Ford F150?
Your vehicle’s RPO codes can be found on a sticker in the vehicle’s glove box or compartment.
What is Flareside vs Styleside?
Flareside designs feature rounded fenders that extend outward from the truck.Meanwhile, styleside designs have a flat-sided bed with wheel arches contained within. Knowing the difference between flareside and styleside beds can help you make an informed decision when buying a full-sized Ford pickup.
How to check engine codes without a code reader Ford F150?
Press the odometer’s Trip and Reset buttons while turning the ignition key ON. After turning the key ON, release the odometer Reset and Trip buttons to check if the Diagnostic Trouble Code or DTC appears on the odometer display.
Do all code readers read transmission codes?
Not all OBD2 scanners can read transmission codes. In order to access the transmission codes the scan tool must have a multi-system diagnostic capability for the specific vehicle you want to scan. A modern OBD2 compatible car will have various computers called electronic control units, or ECUs.
How do I get my f150 diagnostic test mode hidden menu?
How do I get trouble codes without a scanner?
Flip your car’s ignition on and off a couple of times without cranking the engine and finish with the key in the on position. Your car will then check for any saved trouble codes. All the lights on the dash should light up until one remains on—usually the “service engine” light.
Can I use my phone as an OBD2 scanner?
With the Obd Mary diagnostic app, you can scan and reset your car’s ECUs, Additionally, you can read and clear OBD2 codes in the fault memory with your phone.
Does disconnecting battery clear codes?
Leaving the battery disconnected for a few minutes will ensure the vehicle systems will completely reset when you reconnect the battery. Secure the negative cable back to the terminal and cover it with the cap. Disconnecting the battery will clear the error codes and reset the check engine light.
What are Mode 10 permanent codes?
It’s called mode 10, permanent trouble codes. It’s any codes that still may have been cleared. You could have cleared it with a scan tool even, but the computer hasn’t run through the test to clear the codes so it’ll still be stored in there for up to 400 days.
Will a permanent code clear itself?
Yes.PDTCs will be ignored if the vehicle has completed at least 15 warm-up cycles and been driven at least 200 miles since its OBD information was last cleared.
What is a Ford permanent code?
Permanent codes are a special type introduced more recently which can not be cleared using a scan tool. If you have a permanent code the vehicle will clear it itself once the cause has been addressed and sufficient data has been gathered by driving under different conditions (idling, stop and go, highway)