It can be found on the sidewall of the tyre, see image below. Make sure to check the front and rear tyres, as some cars have a staggered fit (different sized tyres on front and back).
How big of a tire can I fit on my car?
As a general rule of thumb, it’s safe to fit a tire up to 20 millimeters wider than stock on the original rim. The actual width of the tire will vary depending on the width of the rim: The tire will expand 5 millimeters for every half inch (12.5 millimeters) increase in rim width.
How do you tell if tyres will fit?
Width and diameter are the two factors that determine tire and rim compatibility. For diameter you’ll need to be sure that your tires and wheels are an exact match, e.g. a 215/65R17 tire will only fit on a 17″ diameter wheel. There’s a bit more flexibility when it comes to wheel widths.
What happens if you put the wrong size tires on a car?
Reduced Performance Quality
Firstly, driving on tires that don’t fit properly can severely hinder your car’s performance capabilities. They do this by preventing the treads from coming into full contact with the pavement and lessening traction as a result.
How do I know what tyres will fit my car? – Related Questions
How do I upgrade tyre size?
Rules for tyre upsizing
- Load Holding Capacity. Firstly, check the load holding capacity of the replacement tyre.
- No contact with the car’s body. At all times, ensure that the tyres do not make contact with the car’s body.
- Sidewall and width proportionality.
- Recalibrate speedometer.
Will any tire fit any rim?
Tires are a part of the wheel setup. For instance, your vehicle has a set size of rims, but you can buy different sizes of tires to fit those rims, as long as the middle of the tires is the correct size. That being said, a vehicle with bigger rims will often be able to fit larger tires than other vehicles.
How do I know what size rims will fit my tires?
RIM DIAMETER
The next number is the wheel’s diameter. For example, a tire with the P225/70R16 91S would fit a rim with a 16-inch diameter. Take note: if you decide to change your rims’ size, you will also need to get new tires that are compatible with the change in size.
How do I know if alloys will fit?
All you need to do is use our easy to use vehicle selector. The wheel offset (measured in millimeters), can be negative or positive, and is the distance from the hub-mounting surface to the rim’s true centerline. The lower the offset is, the further out the alloy wheel will sit on the vehicle.
What is a 285 75R16 equivalent to?
When we convert 285/75R16 to inches, it is equivalent to 32.8×11.
Can I use 285 tires instead of 265?
Fortunately, you can change your tires from 265 to either 275 or 285. However, you must keep in mind to change all of your tires to the same size. Moreover, you have to ensure they have the same rim diameter. Otherwise, you should not go for it.
Are 285 tires 33s?
YES, 285 wide tires are the same as 33” tires although 285 is the tread width in millimeters and 33″ is the tire diameter. 285/75/16 is usually the accepted metric equivalent size for 33’s.
How tall is a 285 tire?
The sidewall height or “aspect ratio” of a 285/75/R16 tire is 75% of 285mm. Example: 285/75R16 (285 X 75 / 2540 x 2) + 16 = 32.8 inches tall.
Can you put a bigger tire on the same rim?
You can change the size of your tires with the same rims, as long as the tire and rims have the same internal diameter. Tires are flexible, however, so the width and height may be changed. Be sure to pay attention to manufacturer specifications when choosing tires.
How much will my speedometer be off with bigger tires?
You might ask: do bigger tires make your speedometer faster? The answer is no. Tire size and speedometer accuracy are directly linked to each other. Up-sizing, or installing a taller tire, will lead to a speedometer reading that is slower than your actual speed.
What does LT mean on a tire?
A tire size that ends with an LT means it’s a special kind of “Flotation Light Truck” tire that can also handle heavy loads and towing, but the tread pattern is engineered to prioritize off-road traction to “float” over sandy surfaces and loose sediment.
What does the T or H mean on tires?
The “T” or “H” on tires pertain to their speed ratings. A T-rated tire can withstand top speeds of up to 118 mph (190 km/h), while an H-rated tire can support up to 130 mph (210 km/h). It is important to note these markings and stay within those speed limits.
What does P on tires mean?
P identifies your tire as a Passenger Tire. The P stands for PMetric. If your tire size starts with LT rather than a P than it identifies the tire as a Light Truck tire. 225 identifies the tire section width, which is the measurement of the tire from sidewall to sidewall in millimeters.
What does the R mean on tires?
“R” stands for the construction method of the tire indicating the tire is a radial tire. The following two numbers (16) indicate the diameter of the wheel rim in inches. The next two or three numbers (94) indicate the load index of the tire. In the example, 94 means the tire can carry 670kg.
Can I use a 205 tire instead of 215?
Physically they should fit on the rim and tire without issue. The difference is going to be the rolling distance is a bit shorter for the new (to you) tires. 215 to 205 is 1cm difference in width.
Can I use V-rated tires instead of H?
A V-rated car requires a tire designed to operate to a maximum of 149 mph and can thus not be fitted with an H-rated tire. The speed rating system was developed to control the safe speeds at which tires must still perform as per the intended design.