If your Subaru touch screen or head unit on your Subaru Crosstrek isn’t working or not responding, here’s a simple but effective solution. Press and hold power, tune, and CD ejector buttons simultaneously for at least 10 seconds. Doing this will reset and restart your head unit system.
How do you reset the touchscreen on a 2012 Subaru?
How do I reset my car screen?
How do you fix the touch screen in a car?
Clean your touchscreen.
Reboot the touchscreen by turning it off and back on again.
Recalibrate the screen from the settings menu.
Perform a factory reset.
Why did my radio stop working in my Subaru?
Potential Cause: The most likely cause for a car that runs fine, but the stereo won’t turn on at all, is a blown fuse. If the fuse connected to the car stereo has blown, the circuit will be incomplete and power simply can’t reach the head unit (the part of the stereo in the center console).
How do I reset my Subaru screen? – Related Questions
Why did my car stereo suddenly stop working?
The most likely reason for your radio’s sudden death is a blown fuse. All car radios have at least one fuse that protects it from power surges coming from somewhere else in the vehicle. The first thing you should do when your radio stops working is check its fuses and replace any that have blown.
Why did my infotainment system stop working?
A malfunction in the power source of the car can also cause the infotainment system to fail. Some of the common reasons why the infotainment system won’t turn on because of the power source failure include blown car fuse, wiring issues, blown valves or lack of power to operate the system.
How do you know if a radio fuse is blown?
Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.
What causes a radio to have no sound?
Check each set of wires and speakers to be sure no wire or lead is connected to a chassis ground. The radio will see this as a short and turn off the internal amplifier causing the on but no sound issue. Each speaker connected to the radio needs dedicated positive and negative leads from the radio to each speaker.
What causes blown radio fuse?
Overloaded Circuit
The most common cause of a blown fuse is when something draws too much power from the circuit. This is most often caused by either too many lights or from using too many plug-in appliances at once.
Keep your ears (and eyes) open for some of these issues:
Distortion at Medium Volumes. The hissing or fuzzy sound of distortion is a common sign of partially blown speakers.
No Vibration.
Lack of Range.
Rattling and Popping Sounds.
Car Radio Isn’t Working.
Infinite Impedance.
Repairing Minor Damage.
How much does it cost to fix a car radio fuse?
Most fuses only cost $10 to $20, but you’ll have to pay additional labor fees to have your fuse replaced by a professional. Depending on the shop you go to, labor can cost between $65 and $100 per hour, so call ahead to get a repair estimate.
Is there a fuse that controls the radio?
A car radio will have at least one fuse to protect the unit from things like power surges or other electrical issues. If too much current is sent to the audio system, this fuse will blow out and disconnect the circuit to save the main radio.
Where is the fuse for my car radio?
What happens if I remove radio fuse?
If the radio fuse is removed, the audio system will disable itself. The next time you turn on the radio you will see ”Code” in the frequency display. Use the preset buttons to enter the five-digit code (see page ).
Why does my radio have power but wont turn on?
Most probably, the power wires of the stereo are in bad condition. While one power wire is always out, the other only heats up with the ignition key. But, if their functions get inverted, the stereo will stop working. If these power wires do not have any voltage, it is time to replace them.
One of the easiest ways to fix an unresponsive car stereo screen is to reboot the system. After rebooting, the car stereo starts afresh, and the screen problem is fixed. First, unplug the power cord from the car stereo and cut down the power supply. Now, wait for a few minutes.
How do I reset my radio screen?
Turn your car on, but do not start the engine. Turn the radio off. Hold the radio power button down for a few minutes until it resets.