If you want to be diligent, you can try resetting the MMI by pushing both NAV and MEDIA toggles forward at the same time, while pressing the center of the MMI ****, and holding for about 3 seconds. That will restart and reset your MMI.
Either may mean something as serious as a failure requiring service – likely in red – or as simple as a dirty sensor, so start with a car wash! The fault will not impact normal driving functions.
Where is the Audi pre sense sensor located?
Audi pre sense rear uses radar sensors in the rear bumper to help detect an impending rear-end collision, and can initiate preventive measures.
Audi Pre Sense is a technology system for predictive safety which activates when a potential collision is expected. If this light appears, please ensure that the sensors are clear and not obstructed by dirt. If the light is still illuminated, please contact your nearest Audi dealership.
How do I reset myAudi pre sense? – Related Questions
What is pre sense?
The Pre-Sense basic system can activate hazard lights and apply braking when a possible collision is detected. Side windows, as well as the sunroof, will be automatically closed, and the front seat belts will tighten to further protect everyone involved. Other features this system offers include: Turn assist.
What does Audi central indicator light mean?
Light: Central Indicator Light – Check the message in the instrument cluster for additional information. The message Audi pre-sense and a warning tone will warn you about danger. Light: Brakes: stop vehicle and check brake fluid level.
What does an orange triangle with an exclamation mark mean Audi?
Common Audi Warning Lights Explained
Bring your vehicle to an Audi service center as soon as possible for new brake pads. Central Indicator Light: A triangle with an exclamation mark in the middle is the central indicator light. When this light turns on, check the instrument cluster display for more information.
What does the triangle light with exclamation point mean Audi?
Yellow circle, with triangle and exclamation mark – The Electronic Stability Program ( ESP ) dashboard light flashes if the ESP or traction control is activated whilst driving. If ESP or traction control has been switched off, it will light up continuously.
The glow plug warning light is only seen on diesel Audis and is usually orange in colour. Like the conventional engine management light, it’s designed to alert drivers about faults with the emissions or running of the vehicle.
What is central caution light?
The yellow central warning lamp flashes or lights up, in some cases together with acoustic warnings or additional symbols. Malfunctions and insufficient service fluids can damage the vehicle and cause it to break down. Check the fault as soon as possible. Seek expert assistance if necessary.
What does glow plug warning light mean?
Glow Plug Indicator
Indicator light means that the engine’s glow plugs are warming up and the engine should not be started until the light goes out. If it flashes, an issue has been detected, such as a worn out glow plug.
What can cause the engine management light to come on?
What can cause the engine management light to come on?
Oxygen sensor malfunction. If the sensor detects issues that your vehicle’s fuel is too rich (not enough air) or too lean (too much air, the EML might turn on.
Blocked diesel particulate filter.
Mass airflow sensor.
Ignition system fault.
Loose oil dipstick.
What does drive system malfunction mean?
A drive system failure refers to the notification message that appears in the heads-up display. This notification communicates that there has been an insecurity in the engine. Although this is usually caused by an engine misfire, there may also be other factors that contribute to this error message.
Overheating, blown fuse, etc., are some of the main causes of hybrid system failure. The sudden overheating is usually traceable to cooling system malfunction or a relatively low inverter coolant.
Can you drive a Prius with hybrid system malfunction?
Can I drive my Prius with a hybrid check? No, you really shouldn’t ignore the warning light. While you may still be able to drive your Prius while the indicator light is on, you could be doing more damage to your car.
Can you drive with hybrid system warning light?
Most automakers include a warning light to let the driver know of any problems with the hybrid system. Hybrid drive systems are complex, so the light can come on for a variety of reasons. If the light comes on while driving, you should pull over safely and shut off the car for a few minutes.
How can I tell if my hybrid battery is healthy?
What could check hybrid system mean?
The “Check Hybrid System” warning light is something you may encounter in your Toyota Prius, Camry, Auris or Lexus hybrid. It signals that there is a fault of error within your car’s hybrid system. When you see this error, it is recommended that you take your car to a mechanic where the error can be diagnosed.
How do you fix a hybrid warning light?
In case of the hybrid system warning light, the primary solution you can try is resetting the system. You can shut off the car and let it be for a few minutes. Afterward, restart and let the computer check again. In most cases, it solves the trouble, and you get no warning light again.
What can cause a hybrid car not to start?
A faulty ignition is one of the most common problems. If no spark is created, the engine will fail to start. Defective or incorrect spark plugs are a common cause. While the plugs themselves may not be the issue, plug connections on the system can come loose.