How do you change a fan belt on a John Deere tractor?
by
How to Replace a John Deere Tractor Fan Belt
Lift the engine cover and remove the spark plug wire.
Remove the belt once you have enough play between the pulleys. Place the new belt on and slide the belt tensioner backwards so that the new belt is completely taut.
Replace the spark plug wire and close the engine cover.
If your lawn mower belt keeps breaking it could be due to a number of factors including the quality of the belt itself, damaged pulley bearings, rust or sharp edges on pulley grooves, debris building up inside pulley grooves or a weak tensioner spring.
How do you change a fan belt on a John Deere tractor? – Related Questions
This is usually the result of a belt in poor condition, or a problem with one of the accessory components being driven by the belt. A failed bearing in a pulley being driven by the serpentine belt will also cause the belt to break.
How long should a mower belt last?
What’s the Expected Lifespan of a Mower Drive Belt? You should have no problem getting 3-4 years out of your lawn mower drive belt. However, you can extend the belt’s lifespan beyond this with the correct treatment and maintenance.
How long should fan belts last?
Today, most serpentine belts are expected to last anywhere from 60,000 to 100,000 miles. Some belts can last significantly longer than this, while others give out before 60,000 miles.
Can I replace my alternator belt myself?
Automatic belt tensioners, standard in most cars now, make changing a serpentine belt a simple DIY repair. Follow the clear photos and step-by-step instructions and you’ll be done in 15 minutes.
How do I know if my alternator belt is bad?
How to Tell if Your Drive Belt or Fan Belt Is Bad
you hear a squealing noise: a drive belt that is stretched or out of adjustment can make a squealing noise.
you see physical damage: a belt that is visibly cracked, frayed, torn or broken is no good.
warning lights are on: the alternator is driven by the drive belt.
How do I know if my fan belt is bad?
6 Signs It’s Time to Change Your Fan Belt
Fan Belt Squeaking. The fan belt will squeak when you start your engine when it is time to replace it.
If a pulley is badly worn, it can cause a bad vibration from the cutting deck on your lawn tractor. To check all your pulleys, start by removing the mower deck. Next, remove the mandrel covers and belt, then check all the pulleys for play and roughness when spinning.
How do you tighten the belt on a John Deere mower?
How tight should a mower deck belt be?
Home and Garden Geek adds that you should be able to loop one or two fingers over the same belt when the tractor is off and the belt is “engaged” and pull it gently away from the pullies. This translates to one or two pounds of force. If you need more than two fingers, your deck belt may be too tight.
What is the difference between a deck belt and drive belt?
The “Deck Belt” goes around the pulleys right above the blades on the deck and then to a double pulley. The “Drive Belt” on your mower goes from the transmission, around an Idler pulley then over to the double pulley I mentioned before. The Drive belt also plays a role in making the wheels turn.
Do you have to take mower deck off to replace belt?
To replace this belt, the deck should be off the lawn mower. You’ll crawl underneath and locate the idler pulley(s) and loosen the cap screw at the center of the pulley to allow a wiggling movement in the pulley.