What’s the difference between a utility dolly and an appliance dolly?
An appliance dolly is specifically designed for moving large, heavy appliances and features heavy-duty straps and side rails to secure the appliance in place. A utility dolly is a standard, general-purpose hand truck that is useful for moving boxes, crates, and small furniture and appliances.
Can you use a regular dolly to move appliances?
You should never attempt to move a large appliance without a specialized appliance dolly. These dollies have key differences from typical hand trucks or furniture dollies. Appliance dollies have high loading capacity, often between 600 – 800lbs.
Common dollies are generally rated around 600 to 800 pounds. Heavy duty models are generally available with ratings up to 1,200 pounds. Regardless of the type of dolly used, it’s important not to exceed the weight limit as this may damage the dolly and be a safety hazard for anyone operating the machine.
How do you move a refrigerator into a uhaul? – Related Questions
Can one person move a refrigerator with a dolly?
Use an Appliance Dolly with Cargo Straps
Tilt your fridge on its side rather than front-to-back, then carefully slide the dolly underneath the fridge. Once the fridge is placed onto the dolly, use moving straps and automatic tighteners to wrap the entire length of the appliance and secure the doors.
How do you move a refrigerator in a Uhaul trailer?
How much weight can a dolly take?
Some dollies and hand trucks can move a few hundred pounds, while others can move thousands of pounds. As a general rule, most of the dollies and hand trucks you can buy on Tent and Table can handle at least 600 lbs, though some can handle as much as 1,000 lbs or more.
How much weight can an appliance hand truck hold?
What is the weight limit that the appliance dollies can handle? The maximum load capacity is 800 lbs.
How much weight can a 2 wheel dolly carry?
Designed for moving heavy loads, the utility cart converts into 2 modes for better use. The 2-wheel dolly holds up to 600 pounds on the large, 10-inch wheels, and the 4-wheel cart form holds up to 700 pounds using the additional 5-inch casters.
Refrigerator with cantilever shelves (have brackets that fit in rear wall supports) are tested for 35 pounds per square foot. These shelves should not exceed 50 pounds total weight for full width shelves and 25 pounds for half width shelves. These same limitations hold true for glass and plastic vegetable bin covers.
Can you lay a refrigerator flat to haul it?
If you do lay your fridge down to move it, you can lay it on its front or side, but it’s not recommended that you lay it on its back – the weight of the fridge’s body on its working parts could damage them, even if they’re not exposed.
What is the average weight of a refrigerator?
A standard fridge can weigh anywhere from around 130-450 lbs. However, mini-fridges tend to be lighter, with some models weighing as little as 40-60 lbs.
How do you move a heavy fridge without damaging the floor?
How to Move a Fridge Without Scratching Your Floors
Defrost Your Fridge First.
Remove the Shelving & Secure the Doors.
Obtain a Dolly or a Hand-Truck.
Use Folded Towels or Cloth Rugs to Protect the Floor.
Loading the Fridge onto the Dolly or Hand-Truck.
Navigate Through Doorways and Onto the Moving Truck.
How do you move a large refrigerator without a dolly?
Use furniture sliders: Gently tilt the front portion of your fridge up off the floor (using a pry bar or with the assistance of a partner, if needed) and adhere sliders, also sometimes referred to as “furniture glides,” to the front feet.
Slide the refrigerator away from the wall and secure it to the dolly.
Never move the refrigerator on its side or back for any reason. The refrigerant oil in the compressor may flow into the heat exchanger tubes.
If it is unavoidable to lay the refrigerator on its side, make sure to do it at an upright angle if possible.
Which side do you lay a fridge down?
Transporting Your Refrigerator
Top-Freezer models: Lay it on the side opposite the hinges so the door will remain closed.
Side-by-Side models: Lay it on the freezer side.
French-Door & Bottom-Freezer models: These must always remain upright, though they can be tilted to get through doorways, etc.
How long can you transport a refrigerator on its side?
If you already moved your refrigerator on its side…
If you happened to have moved it on its side, it must sit in an upright position for the same amount of time it was on its side (max 24 hours).
What happens when you lay a refrigerator down on its side?
What Happens When You Lay a Fridge on its Side. When a refrigerator is horizontal, the oil from the compressor will start to move out and into the coolant lines, clogging them.
Why do you have to wait 24 hours to plug in a fridge?
Fridges and freezers are full of fluid that’s used to cool the compartments. In transit, your appliance gets shaken around, so it’s best to let everything settle before you plug it in.