Table of Contents
ToggleHow do you reset the maintenance required light on a 2016 Toyota Tundra?
2007-2017 Models Tundra Maintenance Light Reset
Turn the vehicle all the way off. Press and hold the “Trip” button. Continue to hold the “Trip” button, and without starting the engine, switch the ignition to “On.” When the trip meter is set to all zeros, release the “Trip” button.
How do you reset the maintenance required light on a 2010 Toyota Tundra?
How do you turn off the maintenance required light on a 2017 Toyota Tundra?
How do you reset the maintenance light on a 2015 Tundra? – Related Questions
How do you reset the maintenance required light on a 2014 Toyota Tundra?
Why does my Tundra say maintenance required?
After 5,000 miles, the Toyota Tundra will let you know when it is due for an oil change by displaying a Maintenance Required message on the instrument panel. After getting an oil change, this notification will need to be reset manually using these steps.
How do you reset the maintenance required light?
- Turn ignition switch to the ON position.
- Set the Odometer/Trip Display to TRIP A mode.
- Turn the ignition switch to the OFF position.
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
- The Service Maintenance Reminder Light will.
How do you turn off the maintenance required light on a 2018 Tundra?
How do you reset the maintenance required light on a Toyota Tundra 2021?
Why is my maintenance required light coming on?
The maintenance required light is a warning light that reminds drivers that their car needs a service. It activates in 5,000-mile intervals since carmakers normally recommend basic servicing — oil change, filter replacement, and inspection — every 5,000 miles.
Why does it still say maintenance required after oil change?
What ‘MAINT REQD’ Means. The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.
How do I turn off maintenance required light on Toyota?
Put your key in the ignition and turn it to position one, the position just before starting the car. Push and hold the trip meter reset button on the dashboard, then turn your key to position two. Continue holding the odometer button for 10 seconds. The light should then flash, possibly beep, and then go out.
Why is my maintenance light still on after oil change?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues.
What happens if you don’t reset oil life?
If you don’t reset the indicator, you may find that your car will indicate that you need another oil change far sooner than it should. It’ll be difficult to remember when you should have your oil changed if your car is constantly alerting you at the incorrect time.
What does it mean when my Toyota says maintenance required?
The icon MAINT REQD meaning is important. When the MAINT REQD light goes on it indicates that the vehicle’s scheduled maintenance is due. This service may be covered under your ToyotaCare plan if your vehicle is less than two years old.
How long does it take for oil light to go off?
If the light stays on, the vehicle is due for an oil and filter change. Vehicles equipped with an in-cabin messaging system will see an oil life of 10% to 100% displayed in the center of the dash that should go off in one to five seconds.
Is it OK to drive with oil light on?
If you’re driving along and your oil warning light comes on, take it very seriously. This indicates that your car may be unsafe to drive. Your auto’s engine has lost oil pressure, or the oil level is too low. When the warning light comes on, pull over as soon as possible and shut off the engine.
How long can you drive with orange oil light?
If your oil light comes on, you should try to have your vehicle inspected by a professional mechanic as soon as possible. Note, though, that driving around a bit more won’t destroy anything. Generally speaking, you have about 2 weeks or 500 miles of driving before a flashing oil light turns into a legitimate problem.
How do I reset my change oil light after oil change?
- Switch the ignition on.
- Fully press the accelerator and brake pedals at the same time.
- Keep the accelerator and brake pedals fully pressed.
- After three seconds, a message displays confirming the reset procedure is in progress.
Why is my oil light on but my oil is full?
The oil light on your dashboard doesn’t always mean your oil is low, leaking, or dirty. Instead, it might mean that your oil pressure sensor or your oil pump needs to be replaced.