How do you reset the service light on a Volvo xc60?
Press and hold the trip computer while turning your key to position two. The center arrow will flash red three times. On the third flash, you will let go and an alert will note that you just reset your service light.
How do you reset the maintenance light on a 2016 Volvo S60?
To reset the 2016 Volvo S60 service reminder indicator (SRI) after an oil change service, please follow these instructions:
Turn the ignition to position I.
Press and hold in the OK button on the left steering wheel stalk.
Continue to hold OK, turn the ignition switch to position II.
Wait for 10 seconds.
How do you reset the Oil life on a 2015 Volvo xc60?
How do you reset the maintenance light on a 2016 Volvo v60? – Related Questions
Activate key position II; see Key positions – functions at different levels. Rotate the thumbwheel on the left-hand stalk switch to position Oil level. You will then see information displayed about the engine oil level. For more information on menu navigation, see Menu navigation – combined instrument panel.
How do you change the time in a 2016 Volvo xc60?
To change the settings:
Tap the tab on the upper edge of the display (you will see Settings or Owner’s Manual)
Select Settings.
Select System.
Select Date & Time.
Select Automatic time or set the time and date manually by using the up and down arrows.
How do you reset the maintenance light on a 2015?
How do I reset my oil life display?
Oil Change Indicator Reset
Switch the ignition on.
Fully press the accelerator and brake pedals at the same time.
Keep the accelerator and brake pedals fully pressed.
After three seconds, a message displays confirming the reset procedure is in progress.
How do I clear my Change oil alert?
Hold the Reset Button and Turn the Key
Press and hold the reset button.
Turn the ignition back to the ON position while holding the reset button.
Watch the oil change or maintenance light carefully.
Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How do I reset my display after oil change?
Why won’t my oil light go off after oil change?
If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues.
Why would the oil light come on if the oil is full?
My oil is fine, but the oil light is still on.
The oil light on your dashboard doesn’t always mean your oil is low, leaking, or dirty. Instead, it might mean that your oil pressure sensor or your oil pump needs to be replaced.
How long does it take for service engine soon light to go off after oil change?
The reset can happen automatically after around 10 to 20 cycles. A cycle is a phase where you turn on the car and turn it off again. For other vehicles, you’ll have to drive around 50 to 100 miles before it resets. As you can imagine, you can drive the car with the check engine light on for long periods.
What happens if you don’t reset oil life?
If you don’t reset the indicator, you may find that your car will indicate that you need another oil change far sooner than it should. It’ll be difficult to remember when you should have your oil changed if your car is constantly alerting you at the incorrect time.
Do you need to replace oil at 0% life?
When oil life reaches 0%, service on your vehicle’s engine is now overdue. By driving with degraded oil, your Honda’s engine may fail or significant damage may be caused.
Do you have to manually reset oil life?
Whenever you change the oil in your vehicle, you should reset the engine oil life calculation system.