How do you reset the change oil light on a 2012 Chevy Traverse?
How do you reset the oil light on a 2011 Chevy Equinox?
Use the ◄► buttons to go to the “Vehicle” menu.Use the ▲▼ buttons to toggle the selection to “Oil Life“.Press and hold ✔ on the steering wheel until the oil maintenance system resets to 100%. After performing these four steps, the oil life light should be successfully reset on your Chevy Equinox.
How do you reset the change oil light on a 2010 Chevy Traverse?
Chevy Traverse Oil Life Reset Procedures:
Turn ignition switch to ON position with engine off.
Press TRIP RESET stem until “Oil Life Remaining” message is displayed.
Press and hold the TRIP RESET stem until “Oil Life Remaining” shows “100%”
You will hear 3 chimes and the “Change Engine Oil Soon” message will go off.
How do you reset the oil light on a Chevy Traverse? – Related Questions
How do I reset my display after oil change?
How do I reset my oil life display?
Oil Change Indicator Reset
Switch the ignition on.
Fully press the accelerator and brake pedals at the same time.
Keep the accelerator and brake pedals fully pressed.
After three seconds, a message displays confirming the reset procedure is in progress.
How many quarts of oil does a 2010 Chevy Traverse 3.6 take?
5.5 quarts (with filter). After refill check oil level.
How do you reset the check engine light on a 2010?
How do you reset the maintenance light on a 2010 Chevy Equinox?
Where is the TPMS reset button on a 2010 Chevy Traverse?
Where is the TPMS reset button on a 2011?
The TPMS reset button is usually located beneath the steering wheel. If you are unable to find it, refer to your vehicle’s owner’s manual. Inflate all tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to include the spare tire, as it may have a sensor as well.
What does service tire monitor system mean on 2010 Chevy Traverse?
A Chevy “service tire monitor system” warning can mean one of two things. The first is that your tire pressure is suboptimal and requires adjusting to manufacturer-recommended levels. The second meaning applies if the warning does not go away after filling the tires or if a flashing TPMS light accompanies it.
If your TPMS light remains on after inflating the tires to the proper pressure, try these steps: Drive the car at 50 mph for about 10 minutes. This should reset the tire sensors, and the next time you start the car the TPMS light should be off.
Where is the TPMS reset button located?
The tire pressure monitor reset button is typically located under the steering wheel. Refer to your vehicle’s owner’s manual if you’re unable to locate it. Inflate all tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to include the spare tire, as it may have a sensor as well.
Is disabling TPMS illegal?
30122(b) means you as a tire dealer or performance shop cannot disable any vehicle system required by federal regulation. That means things like audible seat belt warning chimes or driver side airbags or, in this case, TPMS warning and malfunction lights.
Do you have to reset TPMS light?
You should always reset your TPMS after changing or rotating tires, or installing new sensors. Some sensor manufacturers recommend resetting it even after adding air to your tires.
Can a tire shop reset TPMS?
If you have an indirect TPMS system, your mechanic will need to manually reset the sensors after changing your tires. If you have a direct TPMS system, no additional maintenance is required to reset the system.
Is it OK to drive with TPMS light on?
It’s not safe to drive around with your TPMS light illuminated. Without a tire inspection, there’s no way of knowing how quickly air is leaving your tire, or for how long it has been over or underinflated. The best course of action is to use a tire pressure gauge to check the current inflation level of each tire.
Driving too long with the TPMS light on (and low air pressure) could affect your safety, including handling and braking. It can also decrease fuel efficiency, damage your tire sidewalls, and cause uneven tread wear.
Will over inflated tires cause TPMS light to come on?
TPMS is an electronic system inside the tire that monitors the air pressure in your tires. If your tires are under- or over-inflated, the TPMS activates a warning light on your dashboard. When the light is steady, it means you need to have your tire pressure checked.