How do you reset the remote start on a Chevy Equinox?
by
On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again, indicating that you have successfully programmed your key fob. Re-insert the newly programmed key into the ignition in the “On” position to end the programming sequence.
If your remote starter system isn’t working properly, try replacing the battery in your fob. You can find replacement key fob batteries at Batteries Plus. Most remote starter fobs run on 2032 lithium coin cell batteries. This one may seem obvious, but if your vehicle is not in “Park” your remote starter will not work.
Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again). Repeat the on-off cycle three more times—you’ll do four in total.
Why does my remote start not work when my check engine light is on?
If the ‘Check Engine Light’ or Malfunction Indicator Lamp (MIL) is illuminated, the remote start will not work. Don’t panic, one of the reasons the MIL can illuminate is due to a loose gas cap! Reseal the cap, restart the car, and retry step #1!
How do you reset the remote start on a Chevy Equinox? – Related Questions
Does car battery affect remote start?
All remote starters, whether from Compustar, Arctic Start, or another brand, draw power from your battery. Even while your engine is off, a remote start system still draws current while it waits to receive a command from your remote fob.
Will a weak battery cause remote start not to work?
Cause: It is rare, but does happen – in most cases, this is caused by a dead battery in the vehicle or the battery having been disconnected when being serviced. Remote starters usually have some type of non-volatile memory to retain things like programming features and remote control codes.
How can I bypass the check engine light?
How to Get Rid of the “Check Engine” Light: 4 Techniques
4 Ways to Reset the “Check Engine” Light. Method.
Drive Your Car and Let the Light Go Off by Itself.
One common culprit for this problem is the crankshaft position sensor, which measures the position and speed of the crankshaft. The computer uses the information from this sensor to know when to fire the spark plugs. If the sensor isn’t working, the spark plugs won’t fire, keeping the engine from starting.
Does starter affect check engine light?
No, a starter cannot cause a check engine light. And a starter doesn’t do much when the car is runnig, which is when you would look for your check engine to be active.
Can a low key fob battery cause check engine light?
With a faulty battery, there’s bound be low voltage at the car’s computer which may cause the check engine light to come on. When you take your car to the mechanic, he will test your car’s battery before doing any further diagnostic testing.
How do I know if my key fob needs a new battery?
The transmitter loses its range when the fob battery becomes weaker.
Other signals include:
If your key is not giving out any signal.
If you have to press the button repeatedly before your vehicle accepts the signal.
If your key remote is inconsistent or unreliable.
How can I tell if my key fob is bad?
3 Signs Your Car Key Needs Replacement
Your key fob is glitchy. One of the most obvious signs that something is wrong with is a glitchy key fob.
The signal strength is reduced or unresponsive. Depending on the type of fob you own, the signal strength varies.
What are the signs of a weak fob battery? As the fob battery becomes weaker, the transmitter loses its range. This means that you have to be closer to the car for the fob to work. In cars with a push-button start, a vehicle may not always recognize a smart key fob in your pocket or purse if the fob battery is weak.
How much does it cost to replace key fob battery?
Key Fob Battery Replacement
Generally, these batteries cost $10 or less, though some fobs require two batteries. Battery specialist shops and dealers will often replace the battery for free since it only takes a moment or two.
How often should a key fob battery be changed?
Typically, a car fob battery should last between three and four years. Additionally, there are a number of signs that will tell you when your fob battery is dying. The first sign is reduced signal strength. Most modern fobs can send a signal to your vehicle from up to 50 feet away.
How do I reprogram my key fob after replacing the battery?
How do you reset a Chevy key fob?
On the Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again. This indicates that you have successfully programmed the Chevy key fob. Re-insert the programmed key back into the ignition to the “On” position, ending the programming sequence.
Why is my car not responding to my key fob?
This usually happens because of low batteries, but shock can also cause the fob to lose its pairing. Most remotes can be reset, so check your car’s user manual for the resetting sequence. If resetting fails to solve the problem, the fob will need to be reprogrammed.
Can AutoZone reprogram my key fob?
AutoZone provides a variety of key fobs that work for most vehicle makes, and they will help you match and program your fob to your car. Key fobs can range from $20 to $400 depending on the vehicle and the type of fob you buy.
How much does it cost to program a remote starter key fob?
The cost for programming a key fob typically ranges from $85 to $400. Key fobs, otherwise known as a remote fobs, are conventional for most automobiles these days. Car keys come with an added remote fob with buttons that can lock and unlock the vehicle from the outside and the trunk or back hatch.