How do you reset the remote start on a Chevy Equinox?
by
On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again, indicating that you have successfully programmed your key fob. Re-insert the newly programmed key into the ignition in the “On” position to end the programming sequence.
If your remote start is not working, you should check if you did it right and make sure your engine temperature is not high. You should also turn off the hazard lights, properly close the hood and gas cap, and make sure the car is in ‘park mode.
Double check your engine coolant and oil temperatures: If the engine coolant temperature is too high or the oil pressure is too low, remote start is disabled! After you have let the car cool down for 5-10 minutes and rechecked the levels, retry the start procedure.
How do I reset my remote control starter?
Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again). Repeat the on-off cycle three more times—you’ll do four in total.
How do you reset the remote start on a Chevy Equinox? – Related Questions
How do you troubleshoot a remote starter?
If you find that your vehicle has a remote start that isn’t functioning, troubleshoot your car key remote.
Put Your Car In Park.
Turn Car On And Off Again.
Close Your Hood.
Turn Off Hazard Lights.
Reprogram Your Remote.
Check Remote Instructions.
Fix Your Car Key Remote.
Address The Check Engine Light.
How do I reprogram my remote start autostart?
How do I reset my remote after replacing my battery?
How much does it cost to reprogram a remote starter?
The price can range anywhere from $50 to $200. The actual price depends on a few different factors, such as: Type of key fob. If the key fob includes a transponder key or keyless ignition, it could cost more to reprogram than a simple key fob.
Does AutoZone reprogram remotes?
AutoZone provides a variety of key fobs that work for most vehicle makes, and they will help you match and program your fob to your car. Key fobs can range from $20 to $400 depending on the vehicle and the type of fob you buy.
Do I have to reprogram my key fob if I change the battery?
Typically, you do not need to reprogram the key fob after changing the battery. However, if you’ve replaced not just the batteries but also some of the internal wiring and electronics, you may need to reprogram it by pairing it with your vehicle once again.
Why does my key fob not work after replacing battery?
For your remote key fob to work properly, it has to be connected to a receiver in the vehicle. When the battery in the fob is replaced, it can sometimes interfere with the paired connection between key and car, in which case you’ll need to reset it.
What happens if key fob battery dies in push to start?
Put the mechanical key back into the key fob and close it. Use the key fob to push the START button. Instead of using your finger as you normally would, press the key fob against the button. This is a backup system many manufacturers use to ensure the car can start even when the fob is dead.
Why is my car not responding to my key fob?
This usually happens because of low batteries, but shock can also cause the fob to lose its pairing. Most remotes can be reset, so check your car’s user manual for the resetting sequence. If resetting fails to solve the problem, the fob will need to be reprogrammed.
How often should a key fob battery be changed?
Typically, a car fob battery should last between three and four years. Additionally, there are a number of signs that will tell you when your fob battery is dying. The first sign is reduced signal strength. Most modern fobs can send a signal to your vehicle from up to 50 feet away.
Generally, these batteries cost $10 or less, though some fobs require two batteries. Battery specialist shops and dealers will often replace the battery for free since it only takes a moment or two.
How do I know if my key fob is bad?
3 Signs Your Car Key Needs Replacement
Your key fob is glitchy. One of the most obvious signs that something is wrong with is a glitchy key fob.
The signal strength is reduced or unresponsive. Depending on the type of fob you own, the signal strength varies.
There is visible damage to the key or the fob.
How do you know when key fob battery is low?
What are the signs of a weak fob battery? As the fob battery becomes weaker, the transmitter loses its range. This means that you have to be closer to the car for the fob to work. In cars with a push-button start, a vehicle may not always recognize a smart key fob in your pocket or purse if the fob battery is weak.
What will drain your key fob battery?
LEAVING YOUR KEY CLOSE TO YOUR CAR
Leaving your car key in your car overnight or even on a hook near the car is not recommended. If the fob is too close to your car, it can continue to communicate with it, which could drain the battery.
Will a dead key fob cause car not to start?
Dead key fob
A keyless entry system won’t start the engine unless it detects that your key fob is inside the car. If your key fob has a dead battery, the system likely won’t be able to recognize when the fob is inside the car and accordingly won’t start the engine.
Why won’t my car start but the battery is fine?
If your car won’t start, but your battery is fine, chances are you have a bad alternator. This is another charging system issue, like a dead battery, that won’t let you start your car.