How do you reset the remote start on a Chevy Equinox?
by
On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again, indicating that you have successfully programmed your key fob. Re-insert the newly programmed key into the ignition in the “On” position to end the programming sequence.
If your remote start is not working, you should check if you did it right and make sure your engine temperature is not high. You should also turn off the hazard lights, properly close the hood and gas cap, and make sure the car is in ‘park mode.
Double check your engine coolant and oil temperatures: If the engine coolant temperature is too high or the oil pressure is too low, remote start is disabled! After you have let the car cool down for 5-10 minutes and rechecked the levels, retry the start procedure.
How do I reset my remote starter?
Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again). Repeat the on-off cycle three more times—you’ll do four in total.
How do you reset the remote start on a Chevy Equinox? – Related Questions
How much does it cost to reprogram a remote starter?
The price can range anywhere from $50 to $200. The actual price depends on a few different factors, such as: Type of key fob. If the key fob includes a transponder key or keyless ignition, it could cost more to reprogram than a simple key fob.
Can you factory reset remote?
You can use Android Device Manager to remotely lock your device, erase everything on it, or change the lock screen passcode.Touch the box next to “Allow remote lock and factory reset.” When the “Activate device administrator” screen appears, read the text and touch Activate to turn on the device administrator.
How do I reset my remote after replacing my battery?
How do I get my remote starter to work?
How can you tell if a remote starter is bad?
3 Signs Of a Bad Remote Starter
Clicking the Key Fob Once or Twice Does Not Work. When you first get your key fob, ideally it should work flawlessly.
Self-start a New Thing? Let’s say you don’t have problems starting your vehicle.
If the ‘Check Engine Light’ or Malfunction Indicator Lamp (MIL) is illuminated, the remote start will not work. Don’t panic, one of the reasons the MIL can illuminate is due to a loose gas cap!
Can remote starter be replaced?
We can replace nearly any remote or remote car starter fob. Keep scrolling down to find your exact Brand and model replacement remote.
Why won’t my key fob start my car?
Reasons your car won’t detect the key fob
the battery inside the remote is dead. the remote itself is broken or no longer programmed to your car. the car battery is low. the keyless operation system is faulty.
Why is my key fob not working after replacing the battery?
For your remote key fob to work properly, it has to be connected to a receiver in the vehicle. When the battery in the fob is replaced, it can sometimes interfere with the paired connection between key and car, in which case you’ll need to reset it.
Do I have to reprogram key fob after replacing battery?
Typically, you do not need to reprogram the key fob after changing the battery. However, if you’ve replaced not just the batteries but also some of the internal wiring and electronics, you may need to reprogram it by pairing it with your vehicle once again.
How do I know if my key fob battery is low?
The transmitter loses its range when the fob battery becomes weaker.
Other signals include:
If your key is not giving out any signal.
If you have to press the button repeatedly before your vehicle accepts the signal.
Leaving your car key in your car overnight or even on a hook near the car is not recommended. If the fob is too close to your car, it can continue to communicate with it, which could drain the battery.
How often should a key fob battery be changed?
Typically, a car fob battery should last between three and four years. Additionally, there are a number of signs that will tell you when your fob battery is dying. The first sign is reduced signal strength. Most modern fobs can send a signal to your vehicle from up to 50 feet away.
Is my key fob draining my car battery?
“A key fob will constantly try to communicate with the car.And that does cause a slight drain on the battery, but generally that won’t completely drain a healthy car battery,” says Mike Monticello, Consumer Reports’ road test manager. “The key fob is, in a sense, causing the issue.
Can a faulty remote start drain your battery?
However, it is still possible for a remote car starter to consume too much power from your battery. In this case, we highly recommend visiting your Compustar or Arctic Start installer if your vehicle’s battery repeatedly dies after you’ve installed a remote start system.
How far should I keep my key fob away from my car?
The vehicle and fob communicate using low-power radio signals that are only effective when the fob is within approximately 36 inches of the car door or ignition start/stop button.