How do you reset the remote start on a Chevy Silverado?
by
On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again, indicating that you have successfully programmed your key fob. Re-insert the newly programmed key into the ignition in the “On” position to end the programming sequence.
Why won’t my remote start work on my 2013 Silverado?
Some reasons why remote start might not work is if the function is disabled if the hood is not closed, if the key fob is inside the car (to prevent you from locking yourself out), or if the hazard lights are on.
Double check your engine coolant and oil temperatures: If the engine coolant temperature is too high or the oil pressure is too low, remote start is disabled! After you have let the car cool down for 5-10 minutes and rechecked the levels, retry the start procedure.
Why won’t my remote start work on my truck?
The single biggest thing that can cause a remote starter not to engage is a faulty or missing hood switch. This device gets installed under the hood of your vehicle and prevents the engine from starting when the hood is up.
How do you reset the remote start on a Chevy Silverado? – Related Questions
How do I reset my remote starter?
Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again). Repeat the on-off cycle three more times—you’ll do four in total.
How do I reprogram my remote start?
Why won’t my remote start work when my check engine light is on?
If the ‘Check Engine Light’ or Malfunction Indicator Lamp (MIL) is illuminated, the remote start will not work. Don’t panic, one of the reasons the MIL can illuminate is due to a loose gas cap! Reseal the cap, restart the car, and retry step #1!
Can a weak key fob battery cause car not to start?
Q: Can a low battery key fob cause car not to start? Yes, a low battery key fob can cause your car not to start.
Check and replace the key fob battery as needed. Take the key fob apart and check for broken contacts or misaligned buttons. Reprogram your remote yourself or have a professional do it. Replace your remote if necessary.
Will dead battery cause key fob not work?
No if your car battery is dead then the electric key clicker will not work. However, most fob keys come with a backup plan. Whether you drive an electric car or a gas-powered car, every vehicle comes with a 12-volt battery which helps power the headlights, locking system and helps the car to start.
How do I reprogram my key fob after replacing the battery?
How do I know if my key fob needs a new battery?
The transmitter loses its range when the fob battery becomes weaker.
Other signals include:
If your key is not giving out any signal.
If you have to press the button repeatedly before your vehicle accepts the signal.
If your key remote is inconsistent or unreliable.
How long before key fob battery dies?
Most car fob batteries will last for three to four years with regular use. But if you regularly leave your key near your car, it’s likely the battery will drain faster. To help your fob battery last longer, you should store your key at least 10 feet away from your car.
What kills key fob battery?
LEAVING YOUR KEY CLOSE TO YOUR CAR
Leaving your car key in your car overnight or even on a hook near the car is not recommended. If the fob is too close to your car, it can continue to communicate with it, which could drain the battery.
Typically, a car fob battery should last between three and four years. Additionally, there are a number of signs that will tell you when your fob battery is dying. The first sign is reduced signal strength. Most modern fobs can send a signal to your vehicle from up to 50 feet away.
What happens when your key fob battery is low?
As the fob battery becomes weaker, the transmitter loses its range. This means that you have to be closer to the car for the fob to work. In cars with a push-button start, a vehicle may not always recognize a smart key fob in your pocket or purse if the fob battery is weak.
Do you have to reset your key fob when you change the battery?
Typically, you do not need to reprogram the key fob after changing the battery. However, if you’ve replaced not just the batteries but also some of the internal wiring and electronics, you may need to reprogram it by pairing it with your vehicle once again.
Can I start my car with a dead key fob?
How much does it cost to replace a key fob battery?
Key Fob Battery Replacement
Generally, these batteries cost $10 or less, though some fobs require two batteries. Battery specialist shops and dealers will often replace the battery for free since it only takes a moment or two.
What does AutoZone charge to program key fob?
AutoZone makes and programs transponder keys with no appointment necessary and at a fraction of what you will pay at a dealership, typically between $20 to $90.