The Hyundai HTRAC® AWD system will operate in front-wheel drive in standard conditions to promote fuel economy. When a loss of traction is detected by the sensors or you choose to use the driver-selectable modes, torque is diverted to the rear axle to improve traction and performance.
Our most advanced system, HTRAC AWD (Hyundai TRACtion All Wheel Drive), is available on most SUV models. HTRAC monitors 50 vehicle inputs over 100 times per second to calculate the torque needed for each wheel.
Is Hyundai AWD on all the time?
While the AWD system is always engaged, drivers have the option of selecting one of three driving modes: Comfort – Power is split approximately 70/30 between the front and rear wheels for stable control is all weather conditions. Smart or Eco – Majority of power is sent to the front wheels for improved fuel efficiency.
To shift into AWD, press down the AWD selection button. The light will indicate that the system has been turned on. In this mode, your car will maximize traction. Keep in mind that your vehicle will adjust modes depending on the speed you’re driving.
How does Hyundai AWD system work? – Related Questions
Does AWD engage automatically?
AWD systems typically operate without any driver involvement. They are computer-controlled systems that use sensors to automatically decide which axle and which wheels receive the most power at any given moment when road surface conditions or vehicle dynamics demand extra traction.
Does AWD automatically kick?
How Does AWD Work? In an AWD system, torque is sent to all four of a vehicle’s wheels automatically. Drivers typically don’t need to act to start the process, though some systems offer selectable modes that allow drivers to determine how power is distributed. There are two types of AWD: full-time and part-time.
How do I know if my Hyundai is AWD?
In some vehicles, the AWD light is simply an illuminated “AWD.” But in other cars, the icon features two car axles with the word “LOCK” underneath them. If you see this light turn on when you start your car, this means your vehicle has an AWD system.
How do I know if my AWD is working?
Have someone stand outside of the car and watch the tires. As you drive into the tree, your tires will try to get traction. If all four wheels of your car are moving, your four-wheel drive is doing its job!
What is All-Wheel Drive Lock mode? When you press the button for All-Wheel Drive Lock mode, torque is distributed to all four wheels equally, to maximize traction. It is then locked into this mode of operation until the button is pressed again, or until your vehicle goes above 19 mph.
Should AWD be on or off?
AWD is fine for most normal snow conditions or for light-duty, off-pavement excursions on dirt roads or slippery surfaces. If you’ll be driving in severe snow or true off-road situations, or if you’re interested in pursuing off-roading as a hobby, you should opt for a vehicle with 4WD and lots of ground clearance.
What are the disadvantages of AWD?
AWD Cons
AWD typically doesn’t get as much life out of the tires because all four wheels are being powered while driving.
Added weight can reduce fuel efficiency.
Limited off-road capabilities.
A more complex system, which raises the cost of a vehicle.
Does AWD use more gas?
Since AWDs are hundreds of pounds heavier than RWDs or FWDs, they use more gas than lighter vehicles. Also, the engines of heavier vehicles must work harder. This extra work by the engine will reduce its gas mileage. Additionally, AWDs must send power to additional wheels, and that requires a lot of energy.
What is AWD lock Hyundai?
How fast can you drive with AWD lock on?
When should I turn AWD lock on?
The all-wheel-drive lock means that power is distributed to all four wheels. The other option is automatic, meaning that the power shift changes based on road conditions. The lock mode is more useful when you’re driving on unpaved roads where one or two wheels may fail.
Instead of waiting for wheelspin or some other trigger to engage maximum grip, using the Lock mode tells the AWD system that maximum grip is required, right away. Use it when driving through deep snow, slippery mud, or when climbing a steep and slippery hill.
Is AWD better for snow and ice?
AWD vehicles can help you get out of snowed-in parking spots, tackle unplowed roads and accelerate on slick surfaces. But without winter tires, they’re not nearly as capable as they can be. AWD does little to aid turning and braking on snow and ice vs. a two-wheel-drive vehicle equipped with all-season tires.
Which is better in snow and ice AWD or 4WD?
And even though AWD and 4WD increase traction, snowy weather still requires caution, and you may experience increased braking distances and slippery handling. Usually, 4WD offers the best traction in the most demanding conditions like deep snow or icy inclines.
Should I use AWD in ice?
So, to drive on these slippery surfaces, traction is crucial. All-wheel-drive systems deliver power to all four wheels at the same time, or they automatically engage torque to all four wheels when needed. That’s why all-wheel drive is best for driving on snowy and icy roads.
Is AWD safer in winter?
While many people think that AWD is enough to take on dangerous ice and snow, there is almost no difference between AWD-equipped vehicles and ordinary cars when it comes to cornering, braking and handling in winter weather.