Table of Contents
ToggleHow long does it take to get a Helium hotspot registered?
After you have clicked “Register Hotspot” and the Helium logo starts spinning, wait on that screen for about 15–30 minutes.
How long does SenseCAP m1 take to sync?
If you need to run Turbo Sync, please wait until the latest blessed snapshot is loaded (around 30 minutes). Was this helpful?
How do I activate SenseCAP?
How long does it take for SenseCAP to register? – Related Questions
How do I connect my SenseCAP to the Internet?
- Open Helium App.
- Pair your Hotspot by pressing the button on the back of the device for 5-6 seconds.
- Select Wi-Fi Network.
- Choose a new Wi-Fi.
- You’ll be prompted to “Forget Network”
- Then select back.
- Plug your Ethernet cable back in.
How do I access my SenseCAP local console?
Input the IP Address (192.168. 168.1) in a browser to enter the Local Console. Then input your device username and password, and click the Login button.
How do I connect SenseCAP to Bluetooth?
2 Setup the Sensor 1) Open the SenseCAP Mate App 2) Press button and hold for 3 seconds, the LED will flash at 1s frequency. 3) Please click the “Setup” button to turn on Bluetooth and click “Scan” to start scanning the sensor’s Bluetooth. 4) Select the Sensor by S/N (label).
How do I find my SenseCAP IP address?
How do I setup a helium Hotspot?
How do I join discord SenseCAP?
Visit our Discord for community support:
Click to join ==> https://discord.gg/sensecap/
What is a SenseCAP hotspot?
SenseCAP MX is a Helium hotspot product line with high-performance and rich features that help user to earn the cryptocurrency HNT. These hotspots are designed and born to build the decentralized wireless LoRaWAN® / 5G/ Wi-Fi network infrastructure.
What antenna comes with SenseCAP M1?
Product Description. This bundle includes all necessary parts to take your SenseCAP M1 (NOT INCLUDED IN THE KIT) outdoor in a secure and durable casing, plus a 5.8dBi high grade LoRa antenna . With the LoRa antenna included you are ready to deploy your hotspot outdoor in no time!
How much electricity does SenseCAP use?
How many volts of electricity does SenseCAP M1 might approximately use? About 5W, just as the electricity consumption of an ordinary light bulb.
How many watts is SenseCAP M1?
| Processor | Raspberry Pi 4 (Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz) |
|---|---|
| Frequency | EU868 Version: 863MHz ~ 870MHz US915 Version: 902MHz ~ 928MHz |
| Sensitivity | -125dBm @125KHz/SF7 |
| -139dBm @125KHz/SF12 | |
| TX Power | Up to 26 dBm |
How much RAM does SenseCAP M1 have?
| Model Number | SenseCAP M1-4GB |
|---|---|
| System Memory | 4 GB RAM |
| Antenna Type | External Antennas |
| Power | USB-C, 5 V/3 A DC |
| Storage | 1× 64 GB MicroSD Card |
What antenna does SenseCAP use?
The SenseCAP M1 and SenseCAP M2 are with RP-SMA Female connectors, which means you need to connect the hotspot with an RP-SMA Male connector antenna or cable.
How many GB is SenseCAP?
2GB of RAM and 64GB of storage on board. 2.4 GHz and 5.0 GHz IEEE 802.11ac WiFi.
How do I run diagnostics on SenseCAP M1?
It will show P2P status, blockchain sync progress, firmware, and other useful info.
- Open the Helium App.
- Pair your Hotspot by pressing the button for 5-6 seconds.
- Pair, Scan, Connect.
- Run diagnostics.
- Check the final report displayed.
Why is my Helium Hotspot not syncing?
Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline.
What Internet speed do you need for Helium mining?
About 5-20Kbps constant. Which Helium hotspot/miner is best? They are all much of a muchness since they are largely based on the same hardware. How quickly you can get one might be more critical in your decision making, since they can be hard to get a hold of as of Sept 2021.