How much does it cost to replace a transmission in a 2011 Jeep Liberty?

A 2011 Jeep Liberty transmission replacement cost is between $5,243 and $5,637. Unfortunately, this is one of the most expensive repairs you could have done to your car.

What transmission does a 2011 Jeep Liberty have?

Only one engine is offered, a 3.7-litre V6 that produces 210 hp and 235 lbs-ft of torque. It has a four-speed automatic transmission and the Command-Trac II powertrain.

How much does it cost to replace a transmission in a 2011 Jeep Liberty? – Related Questions

How do I know if I have a 42RLE transmission?

The transmission can be identified from the outside by an additional electrical connector sticking out of the case, next to the range sensor connector. It will either be 6 pins or 5 pins. Early connectors had 6 pins, with the #1 pin not being used.

What vehicles use a 42RE transmission?

What vehicles have the 42re transmission?
  • 1989-2003 Dodge Dakota.
  • 1998-2000 Dodge Durango.
  • 1989-2001 Dodge Ram pickup 150 / 1500.
  • 1989-2003 Dodge Ram Van B150 / B250.
  • 1993-2004 Jeep Grand Cherokee.
  • 1996-1998 Jeep Grand Cherokee 5.2 V8.

What Jeeps had the 242 transfer case?

The 242 premiered in the XJ Cherokee / Wagoneer and MJ Commache as the SelecTrac option. It was used in the 1991-1998 ZJ Grand Cherokee. The 242 persisted throughout the full run of XJ Cherokees and continued on in the 2002 KJ Liberty.

What transmission did the Willys Jeep have?

The stock transmission during the 20 years of production of the Willys Jeep Utility vehicles was the Borg-Warner T-90 3-speed transmission.

Which Jeeps have 2 speed transfer cases?

This system was first offered in the 2011 Jeep Grand Cherokee. It also comes standard on all 2014 Jeep Cherokees with four-wheel drive and all Jeep Grand Cherokees with a two-speed transfer case. Applications: 2011–present Jeep Grand Cherokee (WK2)

What transmission is in a Jeep CJ7?

CJ-7
Jeep CJ7
Production 1976-1986
Transmission(s) 5-speed manual 4-speed manual 3-speed automatic
Wheelbase 93.3 in
Length 148 in

What year did Jeep change transmission?

A coil-spring suspension was introduced 1997, and in 2002 the Wrangler ditched its old three-speed automatic transmission for a four-speed with overdrive.

How strong is a T5 transmission?

“Best of all the T-5Z has a torque rating of 330 lb-ft based on 100,000 miles of use. The stock T-5Z can handle up to 450 hp with a soft locking clutch when it is not shock loaded like in drag racing.”

What cars came with a T5 transmission?

Applications
  • 1982-83 AMC Spirit.
  • 1982-83 AMC Concord.
  • 1982-88 AMC Eagle.
  • 1982-86 Jeep CJ-7.
  • 1984-86 2.5L Inline 4, 2.8L V6, and turbo diesel Jeep Cherokee XJ/Comanche MJ.
  • 1984-86 Ford Mustang SVO (World-Class T-5 1985-1986)
  • 1983.5-1995 V8 Ford Mustang (World-Class T-5 1985-1995)

What is the toughest transmission?

The Chrysler TorqueFlite A-727 (better known as just the ‘727’) is to this day one of the strongest automatic transmissions ever built.

Is fifth gear the fastest?

The gears determine the amount of power available from the engine. First gear provides the most pulling power but the least potential for speed, whilst fifth gear which provides the least pulling power allows the greatest range of speed.

What gear should I be in at 40 mph?

First gear—0 to 10 mph. Second gear—10 to 20 mph. Third gear—20 to 30 mph. Fourth gear—30-40 mph.

What gear should you be in at 30 mph?

Third gear is a very flexible gear in modern cars, including diesel cars, and it’s the ideal gear when you need to keep your speed to 30mph or under.

What speed uses the least fuel?

7. The Energy Saving Trust says that the most efficient speed you can travel in a car in terms of achieving the best fuel economy is 55-65mph. Any faster, though, and the fuel efficiency decreases rapidly. For example, driving at 85mph uses 40% more fuel than at 70mph (oh, and it’s illegal too).

Leave a Comment