How much is it to fix a driveshaft in a Silverado?
by
The average cost for a Chevrolet Silverado 1500 axle shaft replacement is between $1,069 and $1,265. Labor costs are estimated between $216 and $272 while parts are priced between $853 and $993.
GM’s attempt to correct the “Chevy Shake” was through addressing an issue with the transmission fluid. GM recommends “owners replace the original transmission fluid with a lighter viscosity to correct the repair of the transmission and correct the shaking”.
Is it hard to replace a driveshaft?
Changing a drive shaft is actually a simple task that a home mechanic can undertake without too much trepidation. It’s just a case of being thorough, being safe, and of course having your trusty Haynes Manual to hand.
Does a steel driveshaft fix the Chevy shake?
The class action says owners have replaced the aluminum driveshafts with custom-made steel driveshafts which completely fixed the problem. The lawsuit says it’s clear GM knows about the so-called Chevy Shake because dealerships have been issued technical service bulletins (TSBs) related to the driveshafts.
How much is it to fix a driveshaft in a Silverado? – Related Questions
What years are affected by the Chevy Shake?
The following vehicles have been known to be affected by the Chevy Shake and may be covered by California’s Lemon Laws for their defective 8-speed transmissions:
2014–2019 Chevrolet Silverado.
2017–2019 Chevrolet Colorado.
2015–2019 Chevrolet Corvette.
2016–2019 Chevrolet Camaro.
2015 – 2020 Chevrolet Tahoe.
Why does my Silverado shake when I accelerate?
What causes the Chevy Shake? The class action lawsuits named two causes for the Chevy Shake: a weak aluminum driveshaft and GM’s 8L90 and 8L45 transmissions. According to Kim v. Bostick, the aluminum driveshaft (known as a “propeller shaft” or “prop shaft”) weakens over time and eventually drops to the ground.
Can driveshaft cause car to shake?
Vibrations from under the vehicle
A common symptom of a failing driveshaft is an intense shaking coming from underneath the vehicle. Worn out u-joints, couplers or carrier bearings can cause the driveshaft to vibrate.
Can drive shaft cause shaking?
Arguably the most common sign of a bad drive shaft is vibration coming from the undercarriage of your vehicle. The severity of the vibration may be determined by the amount of deterioration sustained by your drive shaft, which makes early identification preferable to avoid further damage.
How do you fix a driveshaft vibration?
If it’s a used driveshaft that is causing the vibration, sometimes an easy fix is to rotate the driveshaft 180 degrees in the differential yoke. This may help improve the balance. Of course, the universal joints and the driveshaft itself need to be closely inspected, looking for any wear or collision damage.
Vibration in a driveshaft can be caused by many conditions. One of the most common cause of driveline vibration are worn U-joints or slip splines, out-of-balance components, yokes out of phase or misaligned angles, approaching critical speed range, and yoke ears that are not concentric with the splines.
What is the most common drive shaft problem?
Worn or broken U-joints are a common driveshaft problem. If you know where to look, you can often check the U-joints yourself. Simply put the vehicle in park, put the vehicle into neutral, and then move the U-joint yokes back and forth. Too much movement is an indication that you should take it in for replacement.
How can I tell if my driveshaft is out of balance?
INTENSE VIBRATIONS AND SHUDDERING
Vibrations and shuddering are the most common sign of a failing driveshaft. If the bushings or U-joint wear out you can experience excessive driveshaft vibration. This may also result from the driveshaft not being bolted down properly or the unit being out of balance.
What does a failing drive shaft sound like?
Abnormal Noises
If the bushing or bearing that supports the driveshaft or the driveshaft U-joints wear out or fail, they can interfere with the driveshaft’s ability to rotate correctly. This may result in unusual rattling, clunking, scraping, or even squeaking sounds from underneath the vehicle.
Can you drive with a worn drive shaft?
Can You Drive a Vehicle With a Bad Driveshaft? It can be possible to drive a vehicle with a bad driveshaft, but not wise to do it for long. If it were to snap you will lose power to that axle. It can also fall and get stuck between the ground and the car, restricting movement.
Because of the wide variety of drive shafts that exist, there is no average life expectancy that you can refer to for them. However, you can obtain a rough estimate for personal vehicles’ drive shafts, which is about 75,000 miles.
How do you check a drive shaft?
Why would a drive shaft needs replacing?
Additional reasons why the drive shaft may need to be replaced include defective welds, defective parts and overall wear and tear. If there are problems with a drive shaft and it’s caught early enough, it’s going to cost a lot less than if the problem were to continue for a long period of time.
What happens if you drive with a broken drive shaft?
The answer is simple: your car will stop driving! This shouldn’t sound strange to you, as the broken shaft is what keeps your vehicle going. However, certain factors play a role in this. For instance, driving on a broken drive shaft won’t stop your car if you are going downhill.