How much is it to fix a driveshaft in a Silverado?
by
The average cost for a Chevrolet Silverado 1500 axle shaft replacement is between $1,069 and $1,265. Labor costs are estimated between $216 and $272 while parts are priced between $853 and $993.
Changing a drive shaft is actually a simple task that a home mechanic can undertake without too much trepidation. It’s just a case of being thorough, being safe, and of course having your trusty Haynes Manual to hand.
Does a steel driveshaft fix the Chevy shake?
The class action says owners have replaced the aluminum driveshafts with custom-made steel driveshafts which completely fixed the problem. The lawsuit says it’s clear GM knows about the so-called Chevy Shake because dealerships have been issued technical service bulletins (TSBs) related to the driveshafts.
How long is the drive shaft in a 2006 Chevy Silverado?
38.750″/984.6 mm.
How much is it to fix a driveshaft in a Silverado? – Related Questions
What are the symptoms of a worn drive shaft?
Signs of a bad driveshaft/drivetrain
Vibrations from under the vehicle. A common symptom of a failing driveshaft is an intense shaking coming from underneath the vehicle.
Difficulty turning.
Loud clunking noise.
Car shudders upon acceleration.
Squeaking noise.
Clicking or knocking noise.
How many hours does it take to replace a drive shaft?
Replacing a drive shaft can be a fairly easy task if you have some mechanical knowledge. It will take anywhere from one to two hours, since you probably don’t have access to a lift and other tools a mechanic has available to make the job faster and easier.
Can you drive with a messed up driveshaft?
Can You Drive a Vehicle With a Bad Driveshaft? It can be possible to drive a vehicle with a bad driveshaft, but not wise to do it for long. If it were to snap you will lose power to that axle. It can also fall and get stuck between the ground and the car, restricting movement.
What happens if a driveshaft fails while driving?
A broken driveshaft can prevent wheels from turning properly, giving you trouble when trying to make turns. This issue limits your overall control of the car. You need any issues that prevent you from driving the car correctly addressed right away for safe driving and continued use of the vehicle.
What happens if you drive with a broken drive shaft?
The answer is simple: your car will stop driving! This shouldn’t sound strange to you, as the broken shaft is what keeps your vehicle going. However, certain factors play a role in this. For instance, driving on a broken drive shaft won’t stop your car if you are going downhill.
Start by measuring from the center of the U-joint at the front of the driveshaft to the center of the U-joint at the rear. This will give you the overall length of the driveshaft.
How long is a drive shaft?
A one-piece steel shaft can’t be longer than 72″ from the center of the u-joint at one end to the center of the u-joint at the other end. If you have need for a driveline to be longer than 72″, it can be converted to a 2-piece driveshaft or built using aluminum tubing.
How do I measure my drive shaft length?
How do you measure a Chevy drive shaft?
How do you inspect a drive shaft?
With hand pressure only, push up and pull down on the driveshaft to check for movement in the center bearing carrier. Movement of shaft in the center bearing carrier is not a violation until the out-of-service criteria is met. Inspect the driveshaft tube for cracks.
How far does driveshaft need to go into transmission?
CC: How much should the front yoke of a driveshaft engage the output shaft of the transmission? DD: The slip yoke should be able to go into the tailshaft of the transmission so the barrel is fully inside the seal. Then, pull out the yoke 1 inch. This is the correct amount of spline contact for the slip yoke.
How much slip should a driveshaft have?
Any time you lift or lower your vehicle, you should have your driveshaft checked for proper clearance. How much slip travel should I have? In most applications the minimum is 3/4 inch and more than 1 inch is not necessary.
Worn or broken U-joints are a common driveshaft problem. If you know where to look, you can often check the U-joints yourself. Simply put the vehicle in park, put the vehicle into neutral, and then move the U-joint yokes back and forth. Too much movement is an indication that you should take it in for replacement.
What does a failing drive shaft sound like?
Abnormal Noises
If the bushing or bearing that supports the driveshaft or the driveshaft U-joints wear out or fail, they can interfere with the driveshaft’s ability to rotate correctly. This may result in unusual rattling, clunking, scraping, or even squeaking sounds from underneath the vehicle.
Can you drive with a messed up drive shaft?
Can You Drive a Vehicle With a Bad Driveshaft? It can be possible to drive a vehicle with a bad driveshaft, but not wise to do it for long. If it were to snap you will lose power to that axle. It can also fall and get stuck between the ground and the car, restricting movement.
What causes drive shaft damage?
Lack of lubrication can cause damage to the driveshaft and its components. High-use driveshafts should be inspected regularly since they can wear prematurely due to excessive movement.