Is 20% or 35% tint darker?

35% tint or 20% tint, which is better? Though a 20% tint is darker and gives your car that stylish look when weighing the safety of drivers, passengers, and pedestrians, 35% is the better choice. 35% film has properties that shield you and the inside of your car from dreaded UV rays.

What is the darkest tint you can legally have?

Legal Window Tint
  • There are no federal laws governing windshield tint.
  • Window tint percentage is measured by visible light transmittance (VLT), or the amount of light passing through the windows.
  • Most new vehicles come with factory tint already installed.
  • 
  • Most manufacturer’s tint will be no darker than 70 percent VLT.

What is the best tint level?

A car window tint percentage of 50% is effective in keeping out UV rays and heat. It blocks half of the light, thus reducing glare and eye strain. If you’re looking for a stylish and smooth look for your mobile car, the best window tint percentage is 35%. It gives off a darker appearance without sacrificing visibility.

Is 20% or 35% tint darker? – Related Questions

Is 20% or 5% tint darker?

You can see through windows with a 20% tint if you’re up close, but it’s still difficult. Typically, it’s enough to deter snoopers, though. When vehicles come with a factory tint, it’s usually between 15% and 20%. A 5% is the darkest tint you can get, and you can’t see through 5% tinted car windows at all.

What tint is most popular?

35% is absolutely one of the most popular window tint percentages used on vehicles.

Is 15 or 20 tint better?

15% tint is darker and only allows 15% of light in. In comparison, 20% tint allows 20% of light through. Driving at night may be difficult with a 15% tint. 15% tint provides more privacy than a 20% tint.

Is 70 percent tint good?

Yes, even though 70% tint is basically clear, a quality 70% tint will block a significant amount of heat from passing through. The dash and passengers are also protected from 99% of UV rays blocked by the 70% tint.

Is 30% a dark tint?

Is 30 percent tint dark? A vehicle with a 30% tint will give you a darker appearance but is still very easy to see through making it one of the most popular tint shades. It is considered a medium shade as it is right between 5% which is the darkest and 50% which is a very light tint and considered clear by most.

Is 35 or 30 tint darker?

A window tint’s percentage rating refers to its Visible Light Transmission (VLT) percent, with VLT being a precise way to say: “How much light window film lets through.” The lower a tint’s percent rating is, the darker that window film. The higher the tint number is, the lighter that window tint is.

Is there a big difference between 30 and 35 tint?

Is 50% tint dark enough?

50% achieves some balance between blocking out the light and but overall, the car will still be easy to see into and only provide limited protection from UV rays. 50 tint is very popular for cars coming from a dealership, however, it could potentially not be enough privacy or tint-darkness for many drivers.

What is factory window tint percentage?

Twenty percent window shade tint is also called “Factory Tint”. Windows tinted at the time the car was manufactured usually have a shade of 15% – 26%.

What is the most darkest tint?

The darkest shade usually available is 5% which blocks 95% of the light from passing through. 50% and above is considered clear. 30% is right in the middle which is why it is a middle shade tint and one of the most popular shade tint for front side windows.

RELATED READING  What is the easiest way to remove old window tint?

How do you check tint percentage?

If you cannot find out what the factory tint percentage of your car windows is, you can always find a tint meter to check the percentage. Simply roll down your window halfway and then measure the tint with the meter. This is also the method that law enforcement uses to check car window tint percentages.

What is 20 tint look like?

How do you know if your tint is too dark?

Many states limit window tint to 35 percent, and some set the limit at 50 and even 70 percent. Here’s the other answer: It’s too dark when it diminishes your vision or you’re unable to make eye contact with other people on the road.

What does 25 percent tint mean?

25 tint is a term that is used to describe a window film that allows 25 percent visible light transmission (VLT). This means that 75% of the visible light will be blocked. Essentially, the lower the tint percentage, the less light can pass through, making 25 window tint darker than 3/4’s of all other tint film options.

Is 10% or 5% tint darker?

The percentages refer to visible light transmission (VLT), which is the amount of visible light that can come through the windows. So this means that the lower the percentage, the darker the tint will be.

Leave a Comment