Simple Green All-Purpose Cleaner is gentle enough for delicate car surfaces, yet tough enough to cut through dirt, grime, and bug residue for a clean, polished and protective shine. Home car care doesn’t mean cutting corners.
Yes, Simple Green can be used both on the interior and exterior of your car. In the interior, use Simple Green for deodorizing and cutting grease & dirt on carpet and upholstery.
Does Simple Green take off paint?
Apply full strength Simple Green to all affected areas.Scrub with a soft bristle brush or non-abrasive scrubbing pad.Rinse with clean water.Dry with lint free cloth or allow to air dry.
What should you not use Simple Green on?
Or contact Consumer Relations at 800-228-0709 and request a free “Dilution Chart.” Simple Green is not recommended for use on suede, leather, unfinished wood, opals or pearls.
Is it OK to wash car with Simple Green? – Related Questions
Why is Simple Green so good?
Simple Green is non-abrasive and non-corrosive, making it safe for use on a wide range of surfaces. It also carries the U.S. EPA Safer Choice label, ensuring that it works well, is effective, and is safer for people and the planet.
Does Simple Green cause rust?
The aqueous-base and alkalinity of Simple Green All-Purpose Cleaner can accelerate the corrosion process. Therefore, contact times for unprotected or unpainted aluminum surfaces should be kept as brief as the job will allow – never for more than 10 minutes.
Can you pour Simple Green down the drain?
Pour 2 cups of full strength Simple Green All-Purpose Cleaner into the drain in the evening. Let it sit. Allow the product to remain in the drain overnight. Rinse.
Does Simple Green melt plastic?
Simple Green All-Purpose Cleaner removes food residue, dirt, and more without degrading or discoloring plastic or removing paint.
Is Simple Green actually safe?
SIMPLE GREEN® is safe for use on skin and will not cause irritation in the majority of users. Avoid contact with eyes, irritation may result.
Does Simple Green remove mold?
An EPA-registered disinfectant will effectively inhibit mold growth and the odors caused by it when applied to hard, non-porous surfaces. At 2 oz.per gallon, Simple Green d Pro 5 will effectively inhibit the growth of mold and mildew and the odors caused by them when applied to hard, non-porous surfaces.
Can you mix Simple Green and vinegar?
What is Simple Green used to clean?
Simple Green All-Purpose Cleaner can be used on any washable surface, from floors and walls to laundry stains. It removes the toughest stains including dirt, grease, oil, pet stains, coffee and juice stains, lipstick, blood, adhesives and much more.
Whether it’s a soap scum ring around the tub from bath time or stubborn stains from everyday dirt and oils, Simple Green All-Purpose Cleaner can dissolve soap scum and clean bathtub stains. To prevent soap scum buildup and stains, it’s best to clean out your bathtub every week.
Does Simple Green clean grout?
Simple Green All-Purpose Cleaner’s formula reaches deep into the tiny pores of your grout between tiles, dislodging and lifting soils without damaging the grout itself.
What is Simple Green made out of?
Simple Green is an American brand of cleaning products produced by Sunshine Makers, Inc.
Ingredients.
Ingredient
CAS Registry Number
Sodium citrate
68-04-2
Tetrasodium glutamate diacetate (also listed as Tetrasodium N,N-bis(carboxymethyl)-L-glutamate)
51981-21-6
Sodium carbonate
497-19-8
Citric acid
77-92-9
How long soak Simple Green?
Soak. Let the Simple Green Oxy Solve solution sit on the surface for 5-7 minutes. Do not allow the solution to dry before rinsing or it will be harder to remove. Rinse.
How long does it take for Simple Green to strip paint?
It could be as short as 12 hours if the paint is pretty fresh, but as long as a week if it’s been on for a while. Subject: How long to Soak models in Simple Green? Let metal models sit over night, or for best results 2 days. The long you let it sit the quicker it all comes out.
Does Simple Green leave a film?
Yes, it leaves a slight ‘film’, that’s why the alcohol mixture or , as I do , wipe the ball off with an alcohol rag. Cleaners are great, and they all have drawbacks, you just have to find the one that fits the most of your needs and adapt from there.
It leaves a residue-free finish, so washable painted surfaces, sealed wood, metals and plastic are clean and ready to paint in minutes. Simple Green Industrial Cleaner & Degreaser is ideal for cleaning tools & equipment.
Is Simple Green safe on painted surfaces?
Additionally, Simple Green All-Purpose Cleaner is fantastic for cleaning your car interior, from car carpet to dashboards, upholstery and beyond. It’s free of harsh or abrasive chemicals, making it safe for car paint and interior surfaces.