If the light returns, then arrange a service inspection to diagnose the fault. In the meantime, it’s perfectly safe to drive your car, but the VSA system won’t be there to protect you in difficult conditions, so it’s a good idea to drive with extra care until the problem is fixed.
The VSA light will go on if it detects that one or more of your wheels are not rotating at the correct speed. Consult your user manual for wheel size.
What does the VSA button mean on Honda Accord?
Also known as Electronic Stability Control (ESC), VSA helps to stabilize the vehicle during cornering if the vehicle turns more or less than what was intended. It assists in maintaining traction on slippery surfaces by regulating engine output and selectively applying the brakes.
Is it safe to drive with the VSA light on? – Related Questions
How do I fix VSA?
If the VSA indicator comes on while driving, pull to the side of the road when it is safe and turn off the engine. Reset the system by restarting the engine, and watch the VSA system indicator. If the indicator remains on, or comes back on while driving, have the VSA system inspected by your Acura dealer.
Why is my ABS brake light and traction control light on Honda Accord?
When the ABS and Traction Control lights illuminate, it is typically due to a faulty wheel or speed sensor or an ABS module failure. An OBDII scanner can read trouble codes stored in the ECU, but you need a mechanic to test these codes to identify the cause and corresponding fix for the issue.
How do I turn my VSA light off?
Find the VSA toggle button.It should be located on the dashboard slightly below and to the left of the steering wheel.Press and hold the button until you hear a beep and the light disappears.
How do you reset Honda warning lights?
On the top left corner of your infotainment screen, press Home and then Settings.Press Vehicle.Then, select Maintenance Info.From here, press Select Reset Items, which will allow you to select which dashboard lights you would like to reset.
Where is the VSA button?
VSA OFF Button
This button is on the driver side control panel. To partically turn the VSA features on and off, press and hold it until you hear a beep. The traction control stops fully functioning, allows the wheels to spin more freely at low speed. The VSA OFF indicator will also come on.
Pull the bottom of the cover open, then take it out of its side hinges by pulling it toward you. The VSA fuse box is located under the interior fuse box on the passenger’s side of the dashboard. To open it, push the tab and pull up the left side of the cover as shown.
What is a VSA sensor?
Electronic stability control relies on sensors to detect when a vehicle is about to go into a skid and intervenes by reducing engine power and rapidly applying and releasing brakes at individual wheels to maintain steering control. Related: Which Cars Have Free Maintenance for 2021?
Should VSA be on or off?
According to the owner’s manual here is when you should turn it off. If your vehicle gets stuck in sand, mud, or fresh snow. You will be able to free your vehicle much easier with it turned off. Some drivers will turn off VSA as they claim you have better road feel.
What does the VSA light mean on a 2008 Honda Accord?
VSA also assists you in maintaining traction while accelerating on loose or slippery road surfaces. The reason you are seeing the warning light continuously is there is a fault somewhere in the complex sensor system that makes the system work by regulating the engine’s output and selectively applying braking.
How do I fix my VSA light on my Honda?
Disconnect the positive cable from the car battery, and then hold down on the brake pedal to drain the car’s electrical system. This will reset the car’s central computer. Change the ABS sensor if the light comes back on.
This warning light serves as an icon for your Honda vehicle’s Vehicle Stability Assist system and indicates that there is something wrong with the system itself. The Vehicle Stability Assist system helps to stabilize your Honda while cornering in the event your ride turns a little more or less than desired.
Is VSA the same as traction control?
The main function of the VSA® system is generally known as Electronic Stability Control (ESC). The system also includes a traction control function. This button is on the driver side control panel. To partially disable VSA® functionality/ features, press and hold it until you hear a beep.
How much does it cost to fix electronic stability control?
A typical Stabilitrak repair costs between $80-$200. That’s not bad for a car repair, especially considering how complex these systems can be.
Should you drive with traction control on or off?
When turned off, you may notice that your vehicle handles differently than you are used to when driving on slippery surfaces. This is why you should leave your traction control on at all times.
Does traction control affect steering?
Traction control works by applying individual wheel braking and throttle to maintain traction under acceleration, but unlike ESC, it is not designed to aid in steering.
Why did my check engine light and traction control light come on?
This light comes on when the computer has detected that something may be malfunctioning in the traction control system. The traction control system monitors the steering and stability of the vehicle and engages when loss of traction has been detected.