So out of the crate the Godzilla is a great pushrod engine. It has 7.3 liters, pushrod with roller hydraulic cam, variable valve timing and is reasonably priced. In typical Ford fashion it is designed for trucks and Ford’s engineering team only thought about trucks.
How many MPG does a 7.3 gas get?
16.5 mpg average and highway at 24 mpg @75 mph.
How many MPG does a F-250 7.3 get?
Based on data from 96 vehicles, 4,962 fuel-ups and 1,479,483 miles of driving, the 2021 Ford F-250 Super Duty gets a combined Avg MPG of 13.50 with a 0.12 MPG margin of error.
Is the Ford 7.3 gas a big block?
If there were a simple test as to where an engine lands, it’s generally accepted that a big-block engine is one with a displacement greater than 400 cubic inches and with an overhead valve design (cam in the block). By this definition, the new Ford 7.3L Godzilla V-8 is in fact a big-block.
Is the Ford 7.3 Godzilla a good engine? – Related Questions
Why is Ford making a 7.3 gas?
For fuel efficiency’s sake, Ford engineers determined they wanted the engine to generate peak power at what Beltramo considers “relatively low” RPMs. “That’s what led us to a pushrod two-valve. It really is the optimum solution for the over 14,000-pound [segment].”
What gas mileage does the 7.3 Godzilla get?
About 10 to 12 mpg on the interstate at 70 mph with no trailer. My F250 gets 15 to 17 mpg on the interstate with no trailer.
Is the 7.3 Godzilla a big block or small block?
With a 7.3L displacement and 445 cubic inches, many might jump to the conclusion that the Godzilla engine is a big block Ford. However, because bore spacing dictates what is a big block or small block configuration, the Godzilla’s 4.53˝ bore spacing makes it more a small block setup than big block.
What cubic inch is the Ford 7.3 gas?
Ford could’ve designed its new big-bore gasoline truck engine to any size it wanted, but it chose to give each cylinder a 4.22-inch bore and a 3.98-inch stroke. Cylinder volume multiplied by eight gives you 445 cubic inches of displacement or, more to the point, 7.3 liters.
What is the cubic inch of a 7.3 gas motor?
The 7.3L displaces 445 cubic inches, and it’s a beast, as the nickname implies. It has 430 hp and 475 lb-ft torque. Considered a workhorse engine, you’ll find it in Ford’s larger trucks.
What is the specs on 7.3 gas engine?
Specifications
| Metric |
Value |
| Stroke |
101 mm |
| Compression ratio |
TBA |
| Max power @ RPM |
430 hp @ 5,500 rpm |
| Max torque @ RPM |
475 lb-ft @ 4,000 rpm |
How many miles will a 7.3 power stroke last?
Robust, iron parts, conservative power and low engine speed are the key ingredients for any diesel engine lasting forever—and if a 7.3L has gone unmodified yet been well maintained its entire life, 400,000 to 500,000 miles is virtually guaranteed.
What 7.3 has the most miles?
Meet 80-year-old Mr. Freeland, the owner of a 2000 Ford F-350 DRW 7.3L Power Stroke Diesel with 1.3 million miles!
How much horsepower does a 7.3 gas have?
A slightly less-powerful version of the 7.3-liter engine, making 350-hp at 3,900 rpm and 468 pounds-feet of torque at 3,900 rpm, is standard on the F-450 chassis cab, F-550, F-600, F-650 and F-750 medium-duty trucks, as well as the F-53 and F-59 stripped-chassis models and revised E-Series vans.
How much oil does the Ford 7.3 gas engine take?
Engine Oil Capacity and Specification – 7.3L
| Variant |
Including the Oil Filter |
| All. |
8.0 qt (7.57 L) |
How much HP can a 7.3 Godzilla handle?
Ford’s 7.3-Liter Godzilla V-8 Can Make 1450 HP With a Supercharger.
Who makes the 7.3 gas engine?
The 7.3 Godzilla is actually the first pushrod V8 produced by Ford in over 20 years. Instead of building the engine off of the modular Coyote platform, Ford went back to its old roots with the cam-in block pushrod design.
Is the 7.3 gas a good engine?
With a tow rating of 45K pounds, the Ford 7.3L is a great choice for a high-performance engine in gasoline-powered trucks, vans, or buses.
How much does a 7.3 Godzilla crate motor cost?
Estimated Price $14,595.00
Our complete 7.3L Ford Godzilla 525HP crate engine package dyno tested ready for installation. This build features the cast iron 6 bolt main block. Comes ready to install into your early Ford resto mod.
Where is the Ford 7.3 gas engine built?
There are fewer parts (compared to the DOHC engines) and it’s built in Windsor [Ontario].” So what makes this Super Duty truck mill a hot rodder’s dream? Let’s start with the block. Bore and stroke are 4.22in x 3.976in respectively, which equates to 445 cubic inches (7.3L) of displacement.
Who makes the 7.3 L Godzilla?
The engine was first used with Ford Super Duty trucks starting with the 2020 model year and was later added to the Ford E-Series for the 2021 model year.
| Ford Godzilla engine |
| Overview |
| Configuration |
Naturally aspirated V8 |
| Displacement |
7.3 L (444.9 cu in) |
| Cylinder bore |
4.22 in (107.2 mm) |