The AM125424 and AM125424C are the same filter.
What does AM107423 oil filter fit?
AM107423 John Deere Oil Filter Fits 160,GT235,GX70,LT180,LTR180,LX172,X300,F510,RX63,SRX75,SX75,Z445.
What does a FRAM PH8170 fit?
FRAM Extra Guard Oil Filter, PH8170, 10K Mile Change Interval Oil Filter, for Select Briggs & Stratton, Craftsman, Cub Cadet, Husqvarna, John Deere, Kawasaki, Massey Ferguson, and Snapper Models.
How often should you change John Deere oil filter?
Replace after every 500 hours or annually. (Interval can vary according to operating conditions.) Initial oil and filter change at 100 hours and then after every 250 hours. Scheduled interval of 250 hours can be extended to 375 hours if John Deere Plus-50 oil and John Deere filter are used.
Is there a difference between AM125424 and AM125424C? – Related Questions
How many hours should you change oil on John Deere tractor?
Change Oil and Filter after every 250 hours, if conditions are not met. Replace after every 1500 hours, or 2 years, or as required, or with Engine Primary Air Filter, whichever occurs first. Never clean.
How often should the oil be changed in a John Deere lawn tractor?
John Deere recommends you check your oil level before each use and to change your oil once a season. That’s about every 50 hours of lawn tractor use.
Is SAE 30 the same as 10w30?
10w30 is thinner than SAE 30. The “30” means that it has the same viscosity as the other when the engine is hot. However, since it is thinner, it will never become as thick as SAE 30 when it gets cold. 10w30 has a viscosity of 10w which means it will start moving and protecting engine parts at a colder temperature.
Can I use synthetic oil in my John Deere riding lawn mower?
In conclusion, yes, you can use a synthetic oil in your mower engine.
How long does synthetic oil last in a lawn mower?
Most lawnmower manufacturers recommend changing engine oil after every 25 hours of operation. Oil should be changed more often in mowers used continually on hilly terrain, in dusty conditions or to mow wet grass.
How often should you service a John Deere tractor?
Check and service every 10 hours/daily, every 200 hours and annually. (Service 1025R, 1026R when restriction indicator is red). Replace after first 50 hours and every 200 hours. Each kit contains above filters and offering a complete solution for your maintenance needs to keep your tractor running at peak performance.
How often should you service a John Deere riding mower?
Every lawn tractor and riding lawn mower needs a tune-up at least once a year. It’s an easy task that’ll take you 30 minutes or less. To make things even easier, TriGreen Equipment has Home Maintenance Kits for every model of John Deere Zero-Turn Mower, riding lawn mower, and lawn tractor.
How often should you change the oil on a riding lawn mower?
For existing riding mowers, it is recommended to change and replace the oil at least once a season, or for every 100 hours of run time.
How often should you change the oil in a tractor?
A tractor oil change should be performed according to the hours specified in your machine’s owner’s manual or at least every six months. Even if the machine isn’t used heavily, one of the main goals of an oil change is to remove contaminants from the motor.
How often should you change hydraulic oil in a John Deere tractor?
Change after first 100 hours, then after every 200 hours, if tractor is not equipped with hydraulic filter, or else if tractor is not equipped with hydraulic filter then change after 600 hours. Service after 200 hours or annually, whichever comes first. Service as required.
How often should you change hydraulic fluid in a tractor?
Check the fluids after the first 100 hours of operation, and replace them every 1000 hours after that, or as recommended by the manufacturer. Be sure to keep a close eye on the oil temperature as well, since running your hydraulic power unit with overheated oil can cause a failure.