The 2012-2014 Toyota Camry U760 ATM ECM Software update recall refers to a shudder that can potentially happen in these Toyota models made during these years. The shudder comes from the transmission, especially during the acceleration of the Camry models.
How much does it cost to replace a torque converter on a 2012 Toyota Camry?
2012 Toyota Camry Transmission Torque Converter – from $207.99+
How much does it cost to fix a torque converter on a Toyota Camry?
Repair shops will charge between $600 and $1000 to replace a torque converter. The torque converter itself is relatively inexpensive (between $150 and $350, depending on the vehicle), but 5-10 hours of labor is involved since the transmission must be removed in order to replace the torque converter.
Why does a 2012 Toyota Camry shudder at a certain speed?
The problem: Affected Toyota cars may exhibit a brief, intermittent transmission shudder while driving under light loads between 25 and 50 mph. This is due to a combination of an engine control module software glitch and a faulty torque converter in the vehicle.
Is there a recall on 2012 Toyota Camry transmission? – Related Questions
How much does it cost to fix a torque converter shudder?
If you plan on fixing it yourself, then you’ll spend around $150 to $500. On the contrary, taking the vehicle to the transmission shop may require $600 to $1000 to cover the repair costs. It’ll also take about 5 to 10 hours to get the job done.
What does torque converter shudder feel like?
When the torque converter starts malfunctioning, you may feel shuddering and even slipping in overdrive. You usually notice your car shuddering because it feels like it’s vibrating. Your car will vibrate even when you’re not going very fast. The shuddering makes the car lag and is very noticeable.
Why does my car shudder when I go fast?
As you get into the higher speeds, if you distinctly feel vibrating coming from the engine, this could be a result of a lack of power, fuel, or oxygen getting to it. The spark plugs, fuel filter, and air filter should all be checked and replaced as needed.
Why does my car shake at a specific speed?
If vibration is felt at certain speeds, the tires may need to be balanced. If the tires are wearing unevenly and causing the car to vibrate, the driver may need a tire rotation. In some cases, the driver may need new tires to solve the problem of vibration.
Why is my car shaking when I get to a certain speed?
The most prevalent cause of vibration is problems with your wheels or tires. The potential problems include improper wheel and tire balance, uneven tire wear, separated tire tread, out of round tires, damaged wheels and even loose lug nuts.
Why does my car shudder when I drive fast?
There are a range of reasons why your car is juddering when you accelerate. Your vehicle could have dirty fuel injectors, a damaged fuel pump, a blocked catalytic converter, a faulty mass airflow sensor, broken spark plugs, or even an accumulation of moisture.
What are the top 5 signs of transmission problems?
What Are the Transmission Failure Symptoms?
- Refusal to Switch Gears. If your vehicle refuses or struggles to change gears, you are more than likely facing a problem with your transmission system.
- Burning Smell.
- Noises When in Neutral.
- Slipping Gears.
- Dragging Clutch.
- Leaking Fluid.
- Check Engine Light.
- Grinding or Shaking.
Why is my car struggling accelerating?
Trouble accelerating can come from a few different engine issues. These include, but are not limited to, dirty fuel injectors, low fuel pressure, and restricted airflow. A problem with the mass airflow sensor, throttle position sensor, or engine speed sensor can also cause a car to have difficulty picking up speed.
What does transmission shudder look like?
What Is a Transmission Shudder? Also known as a torque converter shudder, a transmission shudder refers to when your vehicle’s transmission begins to noticeably shake or tremble convulsively.
What are the symptoms of a failing torque converter?
6 Signs of a Failing Torque Converter
- Loss of Acceleration.
- Slipping Between Gears.
- Vehicle Won’t Shift at All.
- Transmission is Overheating.
- Transmission Fluid Leak.
- Bad Transmission Fluid.
How do I test my torque converter?
Put the pedal to the metal While pressing on the brake pedal, press the accelerator to the floor for two to three seconds. Don’t exceed five seconds, or you risk blowing out the transmission. The RPM the engine maxes out at is the stall speed.
Can you replace torque converter without removing transmission?
No, sorry. The torque converter is sandwiched between the engine and transmission, and covered by the bell housing, which is bolted to the transmission. The only way to get to the torque converter is to remove the transmission from the engine.
What can damage a torque converter?
Many torque converter failures can be caused by excessive friction, which means the torque converter’s needle bearings are damaged. Also, a faulty seals or faulty clutch solenoid can be to blame. A faulty seal can allow fluid to leak and become contaminated. A bad torque converter can damage a transmission.