Summary: General Motors LLC (GM) is recalling certain 2018 Chevrolet Equinox and GMC Terrain vehicles and 2017-2018 GMC Acadia vehicles. The right front intermediate driveshaft may fracture and separate while driving.
The most common reasons a GMC Acadia won’t start are a dead battery, an alternator problem, or failed starter. Search our network of RepairPal Certified shops near you to speak with a technician about your issue.
Is there any recalls on a 2017 GMC Acadia? – Related Questions
Why wont my car start but it has power?
Bad Spark Plugs
If the engine holds compression well, and the fuel system is working correctly, but it still won’t start, that tells us that your car’s spark plugs may not be working. The spark plugs ignite the air/fuel mixture inside the engine’s cylinders. It’s the resulting explosion that actually powers your car.
What could be wrong with my car if it wont start but has power?
If your vehicle won’t start, it’s usually caused by a dying or dead battery, loose or corroded connection cables, a bad alternator or an issue with the starter. It can be hard to determine if you’re dealing with a battery or an alternator problem. Here’s how to know which one is the culprit.
What would cause a GMC not to start?
The most common reasons a GMC Sierra 1500 won’t start are a dead battery, an alternator problem, or failed starter.
Sensors that fail to send information to the computer may cause the engine to run less efficiently, and they can sometimes be the cause of an engine that won’t start. One common culprit for this problem is the crankshaft position sensor, which measures the position and speed of the crankshaft.
What are the signs that the sensors are failing?
First, what are the signs an O2 sensor may have gone bad?
Check Engine Light Comes On.
Noticeable Loss of Fuel Efficiency.
Sulfur or ‘Rotten Egg’ smell from Exhaust.
Black smoke from exhaust.
Emission levels reach high levels.
Your engine hesitates, skips, begins bucking or has power surges.
Why won’t my car start but the battery is fine?
If your car won’t start, but your battery is fine, chances are you have a bad alternator. This is another charging system issue, like a dead battery, that won’t let you start your car.
Can a blown fuse prevent car from starting?
A blown fuse in the starter circuit could be the cause of a no-start problem. Broken or corroded wiring – Damaged or dirty wires to the battery or to the starter solenoid (or wires that are loose) can prevent sufficient power from reaching the starter.
How do you know if your auto fuse is blown?
How do you know if your car blew a fuse?
The blown fuse will be apparent because the wire element within will have melted or burned from the higher electrical current. You can also use a test light or a multimeter to identify the dead fuse without having to pull it out. Both tools are affordable and easy to use.
If your starter relay has gone bad, the electrical signal will never make it from the battery to the starter motor. As a result, your engine won’t turn over – no matter how many times you turn the key. A faulty relay often produces an audible clicking sound when you turn your car.
What are 2 symptoms that would indicate a faulty starter solenoid?
As a result, the common signs of a bad starter solenoid include:
Engine Doesn’t Crank or Start.
No Clicking Noise When Trying to Start the Engine.
Starter Spins Without Fully Engaging the Flywheel (Rare)
Engine Cranks Slowly (Rare)
Test the battery.
Check That Power is Getting to the Starter Solenoid.
How can you tell if a car relay is bad?
Grab a multimeter and set it to Ohms.Touch the leads across the electromagnet coil pins and measure resistance. Anywhere from 50-120 ohms is OK. Out of range or open means a bad electromagnet coil winding and time for a new relay.
Where is the starter relay fuse located?
Starting relay position
The fuse box (also called the power box), the instrument panel under the fuse panel, or the right fender are all possible locations. In most cars, it will be under the hood, in a large box with a black lid. This is where car fuses and relays are installed.
How do you tell if it’s your starter or ignition switch?
First, check the starter by turning the key in the ignition to ON and then using a circuit tester or voltmeter to see if there is power to the wires leading to the starter. If there is power, you have a bad starter.