John Deere Cool-Gard is a fully-formulated, heavy-duty antifreeze/summer coolant that’s specifically engineered to match the performance requirements of John Deere equipment. It is the same antifreeze used in new John Deere machines.
What antifreeze does John Deere use? – Related Questions
How often should you change antifreeze in a tractor?
The coolant in diesel engines needs to be replaced every 2 years (or 30,000 miles), while the coolant in gas engines needs to be replaced only every five years.
How long does antifreeze last in tractor?
Use good quality water. Flush old coolant out. Replace every 2 years. Use of the wrong coolant may cause corrossion.
What kind of coolant does a New Holland tractor take?
OAT coolant is mandatory for use in all FPT Tier 4b engines.
Why is antifreeze orange?
Why is Antifreeze Orange? If antifreeze is orange, it was most likely made with a more modern formula based around what are known as Organic Acid Technologies. Towards the end of the 1990’s, vehicle manufacturers began to use more aluminum and nylon in cooling systems.
What is ethylene glycol coolant?
Ethylene glycol is a chemical commonly used in many commercial and industrial applications including antifreeze and coolant. Ethylene glycol helps keep your car’s engine from freezing in the winter and acts as a coolant to reduce overheating in the summer.
What color is Yanmar coolant?
Yanmar Bullentin
Yanmar did come out with a notice to replace the green colored antifreeze that was used in all new engines with the red extended life stuff. It is important that the cooling system is completely flushed with fresh water before adding the red stuff.
Can you use synthetic oil in a Yanmar diesel engine?
No syntetic oil for regular Yanmars..
They actually might damage the engine on the long run. I don’t rememder exactly why , but I think it has to do with the intergral additives in the specific oils.
How do you flush Yanmar coolant?
Instructions:
On a cool engine, loosen the filler cap and drain old coolant into container.
After draining the engine, remove one of the hot water tank hoses from the top front of the engine.
Remove and clean the overflow tank.
Close all drains and fill with water.
Drain (ie.
Drain (ie.
What oil should I use in a Yanmar diesel engine?
Yanmar engine oil 15W-40 is a proven-performance diesel engine oil, formulated to provide stable performance. Detergency and acid control help prevent engine and bearing corrosion, reducing maintenance downtime.
A tractor oil change should be performed according to the hours specified in your machine’s owner’s manual or at least every six months. Even if the machine isn’t used heavily, one of the main goals of an oil change is to remove contaminants from the motor.
What tractors use Yanmar engines?
The engines in John Deere Compact Utility Tractors are actually made by Yanmar. John Deere’s agreement with Yanmar dates back to the 1970s. These diesel engines are compact, efficient, and high quality. Yanmar trail blazed the small diesel engine industry, releasing the first commercial compact diesel engine in 1933.