Top 2011 Jeep Liberty Problems
- Check Engine Light/Misfire Due to Intake Valve Locks/Valves.
- Power Window Motor May Fail Due to Regulator Assembly.
- The Sky Slider Sunroof May Not Open.
- Engine Will not Start Due to Wireless Control Module Fault.
- Front/Rear Differential Pinion Seal/Transfer Case Leaks are Common.
Are Jeep Libertys reliable?
Jeep tends to be middle of the pack in terms of reliability and the Jeep Liberty is no exception to this rule. The Liberty gets average reliability ratings—meaning that it might experience some problems within the first few years of ownership but it’s pretty unlikely to break down completely.
How long does a 2011 Jeep Liberty last?
Typically, a Jeep Liberty can last anywhere from 10-15 years or 200,000 to 400,000 miles.
What are the problems with Jeep Liberty?
The most reported problems with the Jeep Liberty were the fluid leaks, illuminating check engine lights, and misfires due to the faulty intake valves – and that’s just a few of its mechanical woes. The Jeep Liberty was introduced and was technically the third generation of the Cherokee.
What are common problems with 2011 Jeep Liberty? – Related Questions
What Jeep years should I avoid?
When looking at the worst-performing models of the Jeep Wrangler, 2012 took the win. Among the issues it had, there have been 9 recalls, making it the worst for Jeep. The 2007 and 2008 Jeep Wranglers are not too far from that, as they have 10 and 9 recalls, respectively.
Why did Jeep discontinue the Liberty?
According to Cheers & Gears, the drop in sales of the Liberty could have been part of the cause behind discontinuing the model, along with safety ratings that didn’t quite meet consumer expectations.
Do Jeep Libertys have transmission problems?
Even though this midsize SUV was given some fairly reliable engines at the factory, many owners do you report having problems with their 42RLE transmission. The most common of these Jeep liberty transmission problems is slipping between gears, or a noticeable delay between shifts.
What are common Jeep problems?
Among Jeep’s most commonly reported problems are transmission issues, engine stalling, and the infamous “death wobble” that can happen to steering wheels at high speeds or on rough terrain.
How long does the timing chain last in a Jeep Liberty?
Older cars may have a timing chain, similar to a chain on a motorcycle, with a life cycle of around 60,000 miles. Newer models use timing belts made of polyurethane and Kevlar for long life and durability. They can go as long as 100,000 miles although it’s always a good idea to change it before then.
Is the Jeep Liberty 3.7 a good engine?
Most reviews suggest that the 3.7L isn’t a bad engine. Many owners rave about its long-term reliability. It is prone to a few problems that you should be on the lookout for if you own or are considering a Jeep with the 3.7L (225.8 ci) engine. Being aware of these problems may help you prevent major engine failure.
What is the most reliable jeep engine?
Here are our picks for the best Jeep engines of all-time.
- Willys Go Devil. The original Willys Jeep was built for the American armed forces as a go-anywhere runabout that saw action in World War II.
- 401 V8. The biggest V8 ever outfitted to any Jeep model was the AMC 401.
- 4.0L I6.
- 3.6L Pentastar V6.
- 3.0L Turbodiesel V6.
Do Jeep Libertys have timing belt or chain?
The 3.7L V6 is equipped with a Timing chain.
How reliable is the 3.7 V6?
With proper maintenance the 3.7L Cyclone is known to hold up pretty well up to 200,000 miles and even longer in some cases. It’s a great engine that provides a well-rounded balance of performance and efficiency. The 3.7 Duratec is also a reliable engine, overall.
What is the most reliable V6 ever made?
10 Of The Most Reliable Six-Cylinder Engines Ever Made
- 5/10 Nissan RB26DETT – Nissan Skyline GT-R32.
- 4/10 3M Inline-Six – Toyota 2000GT.
- 3/10 Honda J35 V6 – Honda Accord, Odyssey & Ridgeline.
- 2/10 Honda C30A/C32B V6 – Honda/Acura NSX.
- 1/10 2JZ-GTE Inline-Six – Toyota Supra.
Are Jeep V6 engines reliable?
The 3.6 L FCA Pentastar V6 Engine is an overwhelmingly durable and reliable engine. That’s why it’s been used in in more than ten million Chrysler, Dodge, and Jeep vehicles since 2010. With proper maintenance the 3.6L Pentastar engine can provide years of reliable service.
What are the disadvantages of V6 engine?
As for V6 disadvantages, aside from not being as well-balanced as a straight-six and more difficult to maintain, it’s also a harder engine to work on if you’re the type of person who enjoys getting your hands dirty as a hobby.
Does a V6 engine raise insurance?
Yes, engine size affects insurance because insurers take specific vehicle details into account when determining car insurance prices. For instance, a car with a bigger, more powerful engine is generally more expensive to insure, since it’s associated with faster and riskier driving.
Should I get a 4-cylinder or V6?
If the economy is your top priority, a four-cylinder is likely the best choice for you. A V6 engine will be able to produce a greater amount of power at a quicker pace and will be much more responsive to each tap of the gas pedal, able to quickly accelerate to high speeds.
Does a 4 or 6 cylinder get better gas mileage?
Generally, a four-cylinder engine offers better fuel economy than a six-cylinder. Its better fuel economy is mostly due to having less horsepower but also by being smaller and reducing the weight of your car. Add in turbocharging, and there’s even more improvement in fuel efficiency and performance.
Does driving in 4WD burn more gas?
Unfortunately, driving in 4WD uses more gas than 2WD, simply because more components are used within a 4WD system. More components mean more fuel to power the drivetrain, which leads to increased gas consumption.