If the car cranks when you turn the key, but the engine won’t start, it could be because fuel isn’t getting to the engine. One potential reason for this could be dirty fuel injectors. Over time, the fuel injector nozzles can become clogged with rust, corrosion or debris.
How do you start a GMC Terrain with a dead key fob?
How do I get my GMC Terrain out of anti theft mode?
To disarm the 2010 GMC Terrain anti-theft system, simply press the unlock symbol on your Remote Keyless Entry (RKE) transmitter, then hop back into your SUV, turn the ignition to the ON/RUN position, and allow the alarm to time out after about 30 seconds.
What are the most common problems with a GMC Terrain? – Related Questions
How do I know if my car is in anti-theft mode?
Most modern cars have a dash light that indicates that the anti-theft system has been triggered. The icon for the anti-theft system looks like a car and a lock combination. When this light is on and flashing (it will be either or blue), it will indicate that your car’s anti-theft system is activated.
Can anti-theft stop car from starting?
It is possible that the system can trigger the car alarm or prevent the engine from running without any apparent reason. You have to shut it off if it is not working properly. The car won’t return to normal operation unless you fix the issue of anti theft device car wont start.
How do I get my car out of anti-theft mode?
Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.
How do I disengage the anti-theft system?
In order to deactivate the anti-theft system, car owners must press the unlock button located on the remote key. So it is suggested to use the key to unlock the door, then change the switch of ignition to “on” position.
How do you fix a stuck car in security mode?
Put the key in the ignition and rotate forward two clicks to the “On” position that makes the dashboard light up, but don’t try starting the car. Leave the key there for 15 minutes; it doesn’t always take that long, but it can. After that time, check to see if the anti-theft light has gone out, if one was lit up.
Enter the numbers “106010” when prompted for a dealer access code. This is the most common code used by GM personnel to reset locked Theftlock radios.
What does theftlock mean?
The Theftlock system was designed to discourage theft of the radio. With the Theftlock active, the radio displays “LOC,” which indicates a locked condition any time battery power is lost or removed. When “LOC” is displayed, the radio must be unlocked with the user or factory back-up code before it will operate again.
What is Theftlock?
Theftlock is a theft prevention system designed into GM-brand radios starting in the mid-1990’s.
How do I disable my security immobilizer?
What triggers an immobiliser?
An immobiliser or immobilizer is an electronic security device fitted to a motor vehicle that prevents the engine from being started unless the correct key (transponder or smart key) is present.
How do I reset my GM anti theft system?
Insert ignition key and turn to the “ON ” position.Do not attempt to start the engine.Leave the key in the “ON ” position for approximately 11 minutes. The security light will be steady on or flashing for the 11-minute period.
What triggers an immobilizer?
When you put the key into the ignition or have the key fob inside the vehicle (for keyless fobs), the transponder chip inside the key fob sends a security code to the car’s immobilizer system. If this security code matches the code in the immobilizer system, the car will be allowed to start.
How do I know if my immobiliser is broken?
Symptoms of A Bad Engine Immobiliser
Your car will not unlock when you have problem with engine immobiliser.
The bad engine immobiliser won’t let the vehicle start.
A bad car immobiliser can cause your car alarm to go off continuously.
You can read your car’s handbook to see if it has a factory-installed immobilizer. This book should have all of the information on your vehicle, including whether or not it is equipped with an immobilizer. If you buy a used automobile, it’s possible that the immobilizer was disabled or removed by a former owner.
How do I know if I have an immobiliser?
You can rest assured that your car has a factory-fitted immobiliser if it was manufactured after October 1998. However, if your car was made before that date and you want to check if it has an immobiliser, the easiest way to check is to contact your car’s manufacturer or consult your owner’s manual.
How do I reset my car immobiliser?
Reset the alarm via your remote control (unlock button), the alarm dash led will be flashing rapidly. Turn the ignition on and enter your 4 digit code, the keypad led will turn on for 5 seconds, the unit will reset the immobiliser, the alarm dash led will turn off, the vehicle can now be driven.