The John Deere 455 Lawn Mower requires 1 battery – SP12-35 NB (12 V 35 AH).
What year did John Deere make the 455 garden tractor?
In the fall of 1992, John Deere introduced the 455 as its top-of-the-line garden tractor. It held that flagship position for the nine model years from 1993 through 2001.
How much does a John Deere 455 tractor weigh?
Size. The John Deere 455 tractors with 2-wheel steering weigh 9,650 pounds. Models with all-wheel steering weigh 1,060 pounds. The tractor is 75 inches long, 48 inches wide and 51.2 inches high.
How many quarts of oil does a John Deere 455 take?
John Deere 455 Engine
| Engine Oil |
| Oil capacity |
3 qts 2.8 L |
1 more row
What battery does a John Deere 455 take? – Related Questions
How do you check hydraulic fluid on a John Deere 445?
While checking the fluid, don’t get dirt into the reservoir or on the dipstick.
- Remove the cap from the reservoir, which is usually located behind the driver’s seat on John Deere tractors.
- Pull out the dipstick and read the level.
- If you do need to add fluid, use a clean funnel to pour the oil into the reservoir slowly.
How much hydraulic fluid does a John Deere 445 take?
How much oil does a John Deere hold?
Oil catch pan or other container to drain old oil into (bucket, large coffee can, etc.); typical John Deere mowers hold two quarts of oil.
What engine is in a John Deere 455?
John Deere 455
| John Deere 455 Engine |
| 22HP Yanmar 881cc 3-cyl diesel |
| Fuel tank |
6.5 gal 24.6 L |
| Engine details |
How much oil does a z540m take?
Specifications
| Key Specs |
z540m-ztrak-mower Current Model |
| Model number |
FS730V |
| Displacement |
44.3 cu in. 726 cc |
| Cylinders |
V-twin |
| Lubrication |
Full pressure with replaceable filter, capacity, 2.2 U.S. qt 2.1 L
|
What kind of oil goes in a John Deere transmission?
Hy-Gard transmission and hydraulic oil is a unique oil developed by John Deere engineers to meet the exact needs of John Deere machines. Hy-Gard fluid is a multi-viscosity fluid with a high-viscosity index. Hy-Gard viscosity places it between ISO 46 and 68 grades.
Is transmission oil the same as hydraulic oil?
Transmission oil is a type of hydraulic oil! It a medium that transmits power from the engine to the transmission. Meanwhile, other types of hydraulic fluid includes multigrade engine oil, conventional and antiwear hydraulic oil.
When should I change my John Deere oil?
Replace after every 500 hours or annually. (Interval can vary according to operating conditions.) Initial oil and filter change at 100 hours and then after every 250 hours. Scheduled interval of 250 hours can be extended to 375 hours if John Deere Plus-50 oil and John Deere filter are used.
Is SAE 30 the same as 10w30?
10w30 is thinner than SAE 30. The “30” means that it has the same viscosity as the other when the engine is hot. However, since it is thinner, it will never become as thick as SAE 30 when it gets cold. 10w30 has a viscosity of 10w which means it will start moving and protecting engine parts at a colder temperature.
Does oil go bad?
Simply put, the shelf life of conventional motor or “lube” oil is up to five years. It’s not something that goes bad in a couple of months. It’s impossible to predict exactly how long motor oil shelf life is because petroleum stability (how well it resists change in its properties) is situation-dependent.
Can I use 15w40 instead of SAE 30?
Is SAE 30 the Same as 15w40? No, it is not. Again, SAE 30 is a single grade oil meaning it has a viscosity that is only rated one time: 30 in hot conditions. 15w40 oil on the other hand is a multi-grade oil.