What does AXT mean on tires?

Is a 10 ply tire a good tire?

10-ply tires are typically available for heavy-duty trucks or trailers. It tends to carry heavy materials daily and is more sustainable than conventional tires. Having this trait, since 10-ply tires can take loads more often than not, they are also better off-road, especially for climbing purposes.

What is the benefit of 10 ply tires?

Some drivers with half-ton trucks also prefer to use a 10-ply tire for increased towing capacity. Higher load carrying capacity tires make towing easier because their stiffer tires help stabilize loads and reduce sway at speed.

How do you tell if a tire is 10 ply or not?

Plies – “E”

The last letter in a standard tire size indicates the number of layers used in the construction of the tire. If there is no letter, the tire has the standard 4 plies. A “C” indicates 6 plies, a “D” indicates 8 plies, and an “E” indicates 10 plies.

How much weight can 10 ply tires handle?

At 60 psi on a 10ply tire, the tire’s load carrying capacity is reduced to 2,314 pounds per tire. If the customer runs 65 psi in a 10 ply tire, his capacity is now able to carry 2,507 per tire.

Are all LT tires 10 ply?

LT tires are usually 8-ply (Load Range D) or 10-ply (Load Range E). Passenger Tires usually have a 4-ply or 6-ply equivalent sidewall. The performance trade-off of this added weight is a harsher ride, less fuel efficiency, and less responsive handling.

Does Cooper make a 10 ply tire?

Cooper Discoverer AT3 LT All- Terrain Radial Tire-265/75R16 123R 10-ply.

Is 10 ply or 14 ply better?

With that said the 14 ply tires will definitely hold up better than the 10 ply. For an ST235/80R16 tire, load range G with a 14 ply rating you can use the Taskmaster Provider tire # PRG80235. It is rated for 4,080 pounds at 110 psi. Make sure your wheels and valve stems are rated for 110 psi to avoid air leaking out.

Are all Load Range E tires 10 ply?

Brands mark load range E tires to indicate that their durability is equal to 10-ply tires. This means that the plies located in the tire’s sidewall are able the handle the same stress as 10 plies can. The load range E weight capacity is 1,520 lbs at 80 psi.

What letter rating is a 10 ply tire?

For example, an “E” load range indicates that a tire is equivalent to a 10-ply construction tire.

What’s better load range D or E?

Expert Reply: Load range D has a capacity of 1,220 lbs at 65 psi, whereas load range E has a capacity of 1,520 lbs at 80 psi. Basically the only difference between the two is the weight capacity.

Is a higher ply tire better?

PLY RATING

This number correlates to the maximum safe carrying capacity of the tire when it’s inflated to its maximum pressure. Higher load index ratings mean your tires may be able to handle a heavier load.

Are 10-ply tires actually 10-ply?

The term “ply” refers to a layer of cotton, a prime material with which tires were made back in the day. This means that a 6-ply tire was once a tire made out of 6 layers of cotton while a 10-ply tire was once a tire made out of 10 layers of cotton.

Do I need 10 ply tires for towing?

To practice complete and utter safety when you are towing with your truck, it’s imperative only to use a tire that has at least a 10 Ply tire rating or load range E truck tires.

How often should you rotate 10 ply tires?

Namely, it’s a best practice to rotate tires every 5,000 to 7,500 miles or so. This is a rule of thumb, however, and you’ll want to double-check with your vehicle’s owner’s manual for more specific information.