The Check Coolant Additive Light comes on every 600 hours to remind you to check the coolant levels. While this does not indicate a problem, it does mean you should bring your Super Duty in to a certified Ford Service Center for a Coolant Check. DO NOT just add more coolant to the system!
Mixed with the coolant (2 bottles @ every coolant change and/or add approximately 8-9 oz. every 15K miles according to my friendly Ford dealer), it prevents coolant mixture from foaming due to the normal, constant heavy vibrations inherent in a diesel engine.
How do you reset the check coolant additive on a 2016 Ford f250?
How long does coolant additive last?
For passenger car/light-truck owners, Passenger Car & Light Truck Antifreeze & Coolant eliminates additive drop-out, scaling and other issues inherent to conventional “green” coolants. It’s pre-mixed 50/50 with high-quality water and lasts up to 150,000 miles or 5 years.
What does check coolant additive mean f250? – Related Questions
Can you add too much coolant additive?
Adding too much coolant corrosion inhibitor to the cooling system, no matter what type of inhibitors are utilized in the fluid, will impact other coolant properties. The pH and specific conductance will increase which will lead to corrosion concerns.
Should you use coolant additive?
Supplemental Coolant Additives are vital for the health and longevity of any diesel engine. Diesels, particularly the Ford Powerstroke, are prone to a problem called cavitation (or liner pitting).
What is the best engine coolant additive?
Choose the Best coolant additive: By Overall Editor’s Score
#
Product
Score
1
Motorcraft Ford Diesel Coolant Additive VC8 – 3
9.5
2
Royal Purple 01600 Purple Ice Super-Coolant
9.8
3
Red Line (80204) Water Wetter – Coolant Additives
9.7
4
Hy-Per Lube HPC100-3PK High Performance Super
9.2
How often should I put coolant in my car?
You typically need to flush and fill your coolant every two years or 30,000 miles. If you’re noticing higher-than-average readings on your vehicle’s thermometer, you could be experiencing coolant loss through a leaky gasket or damaged hose.
What is a coolant additive?
Supplemental coolant additives (SCA’s) are a chemical package added to coolant either as a liquid, powder or charge inside a filter to fortify the coolant’s anti-corrosive and other desirable properties.
How often should coolant be changed?
As a general rule of thumb, you should get a coolant flush every 30,000 miles or three to five years, whichever comes first. Your car’s owner’s manual should also outline a more specific interval depending on the manufacturer.
Remove the radiator cap and pour distilled water into the radiator until full. Replace the cap, then start up the vehicle and let it run for 10 to 15 minutes. This will work the distilled water into the engine, flushing out any loose debris or corrosion along with the last of the old antifreeze.
What happens if you never change coolant?
The coolant can become more acidic over time and lose its rust-inhibiting properties, causing corrosion. Corrosion can damage the radiator, water pump, thermostat, radiator cap, hoses and other parts of the cooling system, as well as to the vehicle heater system. And that can cause a car engine to overheat.
How much should a coolant flush cost?
The cost of a coolant flush depends on your vehicle’s coolant capacity, and whether or not you are flushing the system with chemicals or soap before refilling it. Typically, you can expect to pay between $100 and $150 for this service on most vehicles.
How much is a coolant flush at Ford?
Coolant Flush
Price
Recommended
$199.95*
EVERY100,000 milesOR5 years**
Includes
Benefits
Flush out old coolant/anti-freeze Run conditioner through cooling system Replace with fresh coolant/anti-freeze
Block deposit formation Restore lost additives Prevent roadside breakdowns Prolong life of engine
1 more row
How long does coolant flush take?
A trained mechanic can perform a radiator flush in about 30 minutes using a commercial coolant flush and fill machine. Without a machine, a radiator flush takes about two hours. You’ll need to allow additional time for any other services performed at the same time, such as radiator leak repair or inspection.
A Jiffy Lube® coolant service starts with an examination of your radiator and engine cooling system. Then, old antifreeze/coolant is removed from your radiator and replaced with new antifreeze/coolant per your vehicle manufacturer’s recommendations.
Does a coolant flush work?
A coolant flush can prevent damage to both your vehicle’s cooling system and engine. Keeping your system clear of unwanted debris can protect components of your cooling system, such as hoses and coolant lines. These elements of your engine’s cooling system can prevent significant damage to your vehicle.
Does Jiffy Lube Check coolant level?
Fortunately, whether you’re looking for a routine cooling system check or need to flush the entire system, you can stop by Jiffy Lube where highly trained technicians have access to the radiator fluid specifications for every vehicle make and model and can help ensure your vehicle gets the correct type and amount of
Can a radiator flush cause problems?
No, a radiator flush won’t cause problems if it is done correctly and flushes everything out as it is intended, then your car will run the same or better.
How do I know if I need a coolant flush?
Signs You Need a Coolant Flush
Low Coolant Levels. If your coolant is low, your cooling system could have a leak.
Discolored Coolant. Coolant color should never change, but when coolant gets contaminated with debris, or your car is overdue for a coolant flush- the additives in it deplete.